X-Git-Url: http://git.ozlabs.org/?p=ppp.git;a=blobdiff_plain;f=README.sol2;h=4c862208f41d664de54f25d29c1874773bd3c799;hp=1c92ef6f30a10d8da6362847ba331c0602edf30a;hb=e13c0b8028f33c240ab4a468e719863b6a951b27;hpb=30cbaa38bf520afd963d515ca6fe2f264d782fbe diff --git a/README.sol2 b/README.sol2 index 1c92ef6..4c86220 100644 --- a/README.sol2 +++ b/README.sol2 @@ -4,9 +4,12 @@ but are not identical. The STREAMS kernel modules and driver for Solaris 2 are in the svr4 directory (and use some code from the modules directory). -***NOTE***: this package does not support Solaris 2.6 at present; -apparently the kernel interface to network interfaces has changed, and -this package has not yet been adapted correspondingly. Stay tuned. +NOTE: Although the kernel driver and modules have been designed to +operate correctly on SMP systems, they have not been extensively +tested on SMP machines. Some users of SMP Solaris x86 systems have +reported system problems apparently linked to the use of previous +versions of this software. I believe these problems have been fixed. + Installation. ************* @@ -38,5 +41,180 @@ local machine as a gateway to access other hosts. The solution is to create an /etc/ppp/ip-up script containing something like this: #!/bin/sh - /usr/sbin/ndd -set /dev/ip ip_forwarding 2 + /usr/sbin/ndd -set /dev/ip ip_forwarding 1 + +See the man page for ip(7p) for details. + +Dynamic STREAMS Re-Plumbing Support. +************************************ + +Solaris 8 includes dynamic re-plumbing support. With this, modules +below ip can be inserted, or removed, without having the ip stream be +unplumbed, and re-plumbed again. All states in ip for an interface +will therefore now be preserved. Users can install (or upgrade) +modules like firewall, bandwidth manager, cache manager, tunneling, +etc., without shutting the machine down. + +To support this, ppp driver now uses /dev/udp instead of /dev/ip for +the ip stream. The interface stream (where ip module pushed on top of +ppp) is then I_PLINK'ed below the ip stream. /dev/udp is used because +STREAMS will not let a driver be PLINK'ed under itself, and /dev/ip is +typically the driver at the bottom of the tunneling interfaces +stream. The mux ids of the ip streams are then added using +SIOCSxIFMUXID ioctl. + +Users will be able to see the modules on the interface stream by, for +example: + + pikapon% ifconfig ppp modlist + 0 ip + 1 ppp + +Or arbitrarily if bandwidth manager and firewall modules are installed: + + pikapon% ifconfig hme0 modlist + 0 arp + 1 ip + 2 ipqos + 3 firewall + 4 hme + +Snoop Support. +************** + +This version includes support for /usr/sbin/snoop. Tests has been done +on both Solaris 7 and 8. Only IPv4 and IPv6 packets will be sent up to +stream(s) marked as promiscuous, e.g, snoop et al. + +Users will be able to see the packets on the ppp interface by, for example: + + snoop -d ppp0 + +See the man page for snoop(1M) for details. + +IPv6 Support. +************* + +This is for Solaris 8 and later. + +This version has been tested under Solaris 8 running IPv6. As of now, +interoperability testing has only been done between Solaris machines +in terms of the IPV6 NCP. An additional command line option for the +pppd daemon has been added: ipv6cp-use-persistent. + +By default, compilation for IPv6 support is not enabled. Uncomment +the necessary lines in pppd/Makefile.sol2 to enable it. Once done, the +quickest way to get IPv6 running is to add the following somewhere in +the command line option: + + +ipv6 ipv6cp-use-persistent + +The persistent id for the link-local address was added to conform to +RFC 2472; such that if there's an EUI-48 available, use that to make +up the EUI-64. As of now, the Solaris implementation extracts the +EUI-48 id from the Ethernet's MAC address (the ethernet interface +needs to be up). Future works might support other ways of obtaining a +unique yet persistent id, such as EEPROM serial numbers, etc. + +There need not be any up/down scripts for ipv6, e.g. /etc/ppp/ipv6-up +or /etc/ppp/ipv6-down, to trigger IPv6 neighbor discovery for auto +configuration and routing. The in.ndpd daemon will perform all of the +necessary jobs in the background. /etc/inet/ndpd.conf can be further +customized to enable the machine as an IPv6 router. See the man page +for in.ndpd(1M) and ndpd.conf(4) for details. + +Below is a sample output of "ifconfig -a" with persistent link-local +address. Note the UNNUMBERED flag is set because hme0 and ppp0 both +have identical link-local IPv6 addresses: + +lo0: flags=1000849 mtu 8232 index 1 + inet 127.0.0.1 netmask ff000000 +hme0: flags=1000843 mtu 1500 index 2 + inet 129.146.86.248 netmask ffffff00 broadcast 129.146.86.255 + ether 8:0:20:8d:38:c1 +lo0: flags=2000849 mtu 8252 index 1 + inet6 ::1/128 +hme0: flags=2000841 mtu 1500 index 2 + ether 8:0:20:8d:38:c1 + inet6 fe80::a00:20ff:fe8d:38c1/10 +hme0:1: flags=2080841 mtu 1500 index 2 + inet6 fec0::56:a00:20ff:fe8d:38c1/64 +hme0:2: flags=2080841 mtu 1500 index 2 + inet6 2000::56:a00:20ff:fe8d:38c1/64 +hme0:3: flags=2080841 mtu 1500 index 2 + inet6 2::56:a00:20ff:fe8d:38c1/64 +ppp0: flags=10008d1 mtu 1500 index 12 + inet 172.16.1.1 --> 172.16.1.2 netmask ffffff00 +ppp0: flags=2202851 mtu 1500 index 12 + inet6 fe80::a00:20ff:fe8d:38c1/10 --> fe80::a00:20ff:fe7a:24fb + +Note also that a plumbed ipv6 interface stream will exist throughout +the entire PPP session in the case where the peer rejects IPV6CP, +which further causes the interface state to stay down. Unplumbing will +happen when the daemon exits. This is done by design and is not a bug. + +64-bit Support. +*************** + +This version has been tested under Solaris 7 (and Solaris 8 ) in both +32- and 64-bits environments (Ultra class machines). Installing the +package by executing "make install" will result in additional files +residing in /kernel/drv/sparcv9 and /kernel/strmod/sparcv9 +subdirectories. + +64-bit modules and driver have been compiled and tested using Sun's cc. + +Synchronous Serial Support. +*************************** + +This version has working but limited support for the on-board +synchronous HDLC interfaces. It has been tested with the /dev/se_hdlc +and /dev/zsh drivers. Synchronous mode was tested with a Cisco +router. + +There ppp daemon does not directly support controlling the serial +interface. It relies on the /usr/sbin/syncinit command to initialize +HDLC mode and clocking. + +Some bugs remain: large sized frames are not sent/received properly, +and may be related to the IP mtu. This may be due to bugs in pppd +itself, bugs in Solaris or the serial drivers. The /dev/zsh driver +seems more larger and can send/receive larger frames than the +/dev/se_hdlc driver. There is a confirmed bug with NRZ/NRZI mode in +the /dev/se_hdlc driver, and Solaris patch 104596-11 is needed to +correct it. (However this patch seems to introduce other serial +problems. If you don't apply the patch, the workaround is to change +the nrzi mode to yes or no, whichever works) + +How to start pppd with synchronous support: + +#!/bin/sh + +local=1.1.1.1 # your ip address here +baud=38400 # needed, but ignored by serial driver + +# Change to the correct serial driver/port +#dev=/dev/zsh0 +dev=/dev/se_hdlc0 + +# Change the driver, nrzi mode, speed and clocking to match your setup +# This configuration is for external clocking from the DCE +connect="syncinit se_hdlc0 nrzi=no speed=64000 txc=rxc rxc=rxc" + +/usr/sbin/pppd $dev sync $baud novj noauth $local: connect "$connect" + + +Sample Cisco router config excerpt: + +! +! Cisco router setup as DCE with RS-232 DCE cable +! +! +interface Serial0 + ip address 1.1.1.2 255.255.255.0 + encapsulation ppp + clockrate 64000 + no nrzi-encoding + no shutdown +!