]> git.ozlabs.org Git - ppp.git/blobdiff - pppd/sys-svr4.c
typo
[ppp.git] / pppd / sys-svr4.c
index d525064e10dd54f3ba6094dbb7cb183ee6f19b07..02643182995039fb27d7a25516e9995b738eca03 100644 (file)
@@ -25,9 +25,7 @@
  * OR MODIFICATIONS.
  */
 
-#ifndef lint
-static char rcsid[] = "$Id: sys-svr4.c,v 1.23 1999/03/08 05:34:46 paulus Exp $";
-#endif
+#define RCSID  "$Id: sys-svr4.c,v 1.33 1999/08/13 06:46:20 paulus Exp $"
 
 #include <limits.h>
 #include <stdio.h>
@@ -49,7 +47,6 @@ static char rcsid[] = "$Id: sys-svr4.c,v 1.23 1999/03/08 05:34:46 paulus Exp $";
 #include <sys/stropts.h>
 #include <sys/socket.h>
 #include <sys/sockio.h>
-#include <sys/syslog.h>
 #include <sys/sysmacros.h>
 #include <sys/systeminfo.h>
 #include <sys/dlpi.h>
@@ -61,13 +58,17 @@ static char rcsid[] = "$Id: sys-svr4.c,v 1.23 1999/03/08 05:34:46 paulus Exp $";
 #include <net/ppp_defs.h>
 #include <net/pppio.h>
 #include <netinet/in.h>
+#ifdef SOL2
 #include <sys/tihdr.h>
 #include <sys/tiuser.h>
 #include <inet/common.h>
 #include <inet/mib2.h>
+#endif
 
 #include "pppd.h"
 
+static const char rcsid[] = RCSID;
+
 static int     pppfd;
 static int     fdmuxid = -1;
 static int     ipfd;
@@ -84,11 +85,16 @@ static pid_t        tty_sid;        /* original session ID for terminal */
 
 extern u_char  inpacket_buf[]; /* borrowed from main.c */
 
+#define MAX_POLLFDS    32
+static struct pollfd pollfds[MAX_POLLFDS];
+static int n_pollfds;
+
 static int     link_mtu, link_mru;
 
 #define NMODULES       32
 static int     tty_nmodules;
 static char    tty_modules[NMODULES][FMNAMESZ+1];
+static int     tty_npushed;
 
 static int     if_is_up;       /* Interface has been marked up */
 static u_int32_t remote_addr;          /* IP address of peer */
@@ -122,29 +128,23 @@ sys_init()
 #endif
 
     ipfd = open("/dev/ip", O_RDWR, 0);
-    if (ipfd < 0) {
-       syslog(LOG_ERR, "Couldn't open IP device: %m");
-       die(1);
-    }
+    if (ipfd < 0)
+       fatal("Couldn't open IP device: %m");
 
-    if (default_device)
+    if (default_device && !notty)
        tty_sid = getsid((pid_t)0);
 
     pppfd = open("/dev/ppp", O_RDWR | O_NONBLOCK, 0);
-    if (pppfd < 0) {
-       syslog(LOG_ERR, "Can't open /dev/ppp: %m");
-       die(1);
-    }
+    if (pppfd < 0)
+       fatal("Can't open /dev/ppp: %m");
     if (kdebugflag & 1) {
        x = PPPDBG_LOG + PPPDBG_DRIVER;
        strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
     }
 
     /* Assign a new PPA and get its unit number. */
-    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0) {
-       syslog(LOG_ERR, "Can't create new PPP interface: %m");
-       die(1);
-    }
+    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
+       fatal("Can't create new PPP interface: %m");
 
     /*
      * Open the ppp device again and link it under the ip multiplexor.
@@ -152,44 +152,38 @@ sys_init()
      * I don't know any way to be certain they will be the same. :-(
      */
     ifd = open("/dev/ppp", O_RDWR, 0);
-    if (ifd < 0) {
-       syslog(LOG_ERR, "Can't open /dev/ppp (2): %m");
-       die(1);
-    }
+    if (ifd < 0)
+       fatal("Can't open /dev/ppp (2): %m");
     if (kdebugflag & 1) {
        x = PPPDBG_LOG + PPPDBG_DRIVER;
        strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0);
     }
 #ifdef sun
     if (ioctl(ifd, I_PUSH, "ip") < 0) {
-       syslog(LOG_ERR, "Can't push IP module: %m");
        close(ifd);
-       die(1);
+       fatal("Can't push IP module: %m");
     }
 #else
     if (dlpi_attach(ifd, ifunit) < 0 ||
        dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) {
-       syslog(LOG_ERR, "Can't attach to ppp%d: %m", ifunit);
        close(ifd);
-       die(1);
+       fatal("Can't attach to ppp%d: %m", ifunit);
     }
 #endif
     ipmuxid = ioctl(ipfd, I_LINK, ifd);
     close(ifd);
-    if (ipmuxid < 0) {
-       syslog(LOG_ERR, "Can't link PPP device to IP: %m");
-       die(1);
-    }
+    if (ipmuxid < 0)
+       fatal("Can't link PPP device to IP: %m");
 
 #ifndef sun
     /* Set the interface name for the link. */
-    (void) sprintf (ifr.ifr_name, "ppp%d", ifunit);
+    slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "ppp%d", ifunit);
     ifr.ifr_metric = ipmuxid;
-    if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0) {
-       syslog(LOG_ERR, "Can't set interface name %s: %m", ifr.ifr_name);
-       die(1);
-    }
+    if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0)
+       fatal("Can't set interface name %s: %m", ifr.ifr_name);
 #endif
+
+    n_pollfds = 0;
 }
 
 /*
@@ -230,7 +224,7 @@ sys_check_options()
     return 1;
 }
 
-
+#if 0
 /*
  * daemon - Detach us from controlling terminal session.
  */
@@ -254,6 +248,7 @@ daemon(nochdir, noclose)
     }
     return 0;
 }
+#endif
 
 /*
  * ppp_available - check whether the system has any ppp interfaces
@@ -269,7 +264,7 @@ ppp_available()
 /*
  * establish_ppp - Turn the serial port into a ppp interface.
  */
-void
+int
 establish_ppp(fd)
     int fd;
 {
@@ -278,23 +273,29 @@ establish_ppp(fd)
     /* Pop any existing modules off the tty stream. */
     for (i = 0;; ++i)
        if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
+           || strcmp(tty_modules[i], "ptem") == 0
            || ioctl(fd, I_POP, 0) < 0)
            break;
     tty_nmodules = i;
 
     /* Push the async hdlc module and the compressor module. */
-    if (ioctl(fd, I_PUSH, "ppp_ahdl") < 0) {
-       syslog(LOG_ERR, "Couldn't push PPP Async HDLC module: %m");
-       die(1);
+    tty_npushed = 0;
+
+    if(!sync_serial) {
+        if (ioctl(fd, I_PUSH, "ppp_ahdl") < 0) {
+            error("Couldn't push PPP Async HDLC module: %m");
+           return -1;
+        }
+        ++tty_npushed;
     }
     if (kdebugflag & 4) {
        i = PPPDBG_LOG + PPPDBG_AHDLC;
        strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
     }
-    if (ioctl(fd, I_PUSH, "ppp_comp") < 0) {
-       syslog(LOG_ERR, "Couldn't push PPP compression module: %m");
-/*     die(1); */
-    }
+    if (ioctl(fd, I_PUSH, "ppp_comp") < 0)
+       error("Couldn't push PPP compression module: %m");
+    else
+       ++tty_npushed;
     if (kdebugflag & 2) {
        i = PPPDBG_LOG + PPPDBG_COMP;
        strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
@@ -302,9 +303,11 @@ establish_ppp(fd)
 
     /* Link the serial port under the PPP multiplexor. */
     if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) {
-       syslog(LOG_ERR, "Can't link tty to PPP mux: %m");
-       die(1);
+       error("Can't link tty to PPP mux: %m");
+       return -1;
     }
+
+    return pppfd;
 }
 
 /*
@@ -330,16 +333,16 @@ disestablish_ppp(fd)
     if (fdmuxid >= 0) {
        if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
            if (!hungup)
-               syslog(LOG_ERR, "Can't unlink tty from PPP mux: %m");
+               error("Can't unlink tty from PPP mux: %m");
        }
        fdmuxid = -1;
 
        if (!hungup) {
-           while (ioctl(fd, I_POP, 0) >= 0)
-               ;
+           while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0)
+               --tty_npushed;
            for (i = tty_nmodules - 1; i >= 0; --i)
                if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
-                   syslog(LOG_ERR, "Couldn't restore tty module %s: %m",
+                   error("Couldn't restore tty module %s: %m",
                           tty_modules[i]);
        }
        if (hungup && default_device && tty_sid > 0) {
@@ -382,8 +385,8 @@ clean_check()
        break;
     }
     if (s != NULL) {
-       syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
-       syslog(LOG_WARNING, "All received characters had %s", s);
+       warn("Serial link is not 8-bit clean:");
+       warn("All received characters had %s", s);
     }
 }
 
@@ -456,6 +459,9 @@ struct speed {
 #ifdef B57600
     { 57600, B57600 },
 #endif
+#ifdef B76800
+    { 76800, B76800 },
+#endif
 #ifdef B115200
     { 115200, B115200 },
 #endif
@@ -476,7 +482,7 @@ translate_speed(bps)
     for (speedp = speeds; speedp->speed_int; speedp++)
        if (bps == speedp->speed_int)
            return speedp->speed_val;
-    syslog(LOG_WARNING, "speed %d not supported", bps);
+    warn("speed %d not supported", bps);
     return 0;
 }
 
@@ -512,17 +518,15 @@ set_up_tty(fd, local)
     struct termiox tiox;
 #endif
 
-    if (tcgetattr(fd, &tios) < 0) {
-       syslog(LOG_ERR, "tcgetattr: %m");
-       die(1);
-    }
+    if (!sync_serial && tcgetattr(fd, &tios) < 0)
+       fatal("tcgetattr: %m");
 
 #ifndef CRTSCTS
     termiox_ok = 1;
     if (ioctl (fd, TCGETX, &tiox) < 0) {
        termiox_ok = 0;
        if (errno != ENOTTY)
-           syslog (LOG_ERR, "TCGETX: %m");
+           error("TCGETX: %m");
     }
 #endif
 
@@ -542,7 +546,7 @@ set_up_tty(fd, local)
        tios.c_cflag &= ~CRTSCTS;
 #else
     if (crtscts != 0 && !termiox_ok) {
-       syslog(LOG_ERR, "Can't set RTS/CTS flow control");
+       error("Can't set RTS/CTS flow control");
     } else if (crtscts > 0) {
        tiox.x_hflag |= RTSXOFF|CTSXON;
     } else if (crtscts < 0) {
@@ -575,21 +579,16 @@ set_up_tty(fd, local)
         * We can't proceed if the serial port speed is 0,
         * since that implies that the serial port is disabled.
         */
-       if (speed == B0) {
-           syslog(LOG_ERR, "Baud rate for %s is 0; need explicit baud rate",
-                  devnam);
-           die(1);
-       }
+       if (speed == B0)
+           fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
     }
 
-    if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
-       syslog(LOG_ERR, "tcsetattr: %m");
-       die(1);
-    }
+    if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0)
+       fatal("tcsetattr: %m");
 
 #ifndef CRTSCTS
     if (termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){
-       syslog (LOG_ERR, "TCSETXF: %m");
+       error("TCSETXF: %m");
     }
 #endif
 
@@ -616,11 +615,11 @@ restore_tty(fd)
        }
        if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
            if (!hungup && errno != ENXIO)
-               syslog(LOG_WARNING, "tcsetattr: %m");
+               warn("tcsetattr: %m");
 #ifndef CRTSCTS
        if (ioctl (fd, TCSETXF, &inittermiox) < 0){
            if (!hungup && errno != ENXIO)
-               syslog (LOG_ERR, "TCSETXF: %m");
+               error("TCSETXF: %m");
        }
 #endif
        ioctl(fd, TIOCSWINSZ, &wsinfo);
@@ -646,9 +645,10 @@ int fd, on;
  * in demand mode.  Under Solaris 2, we use our existing fd
  * to the ppp driver.
  */
-void
+int
 open_ppp_loopback()
 {
+    return pppfd;
 }
 
 /*
@@ -665,7 +665,7 @@ output(unit, p, len)
     struct pollfd pfd;
 
     if (debug)
-       log_packet(p, len, "sent ", LOG_DEBUG);
+       dbglog("sent %P", p, len);
 
     data.len = len;
     data.buf = (caddr_t) p;
@@ -673,7 +673,7 @@ output(unit, p, len)
     while (putmsg(pppfd, NULL, &data, 0) < 0) {
        if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
            if (errno != ENXIO)
-               syslog(LOG_ERR, "Couldn't send packet: %m");
+               error("Couldn't send packet: %m");
            break;
        }
        pfd.fd = pppfd;
@@ -684,7 +684,7 @@ output(unit, p, len)
 
 
 /*
- * wait_input - wait until there is data available on fd,
+ * wait_input - wait until there is data available,
  * for the length of time specified by *timo (indefinite
  * if timo is NULL).
  */
@@ -693,17 +693,50 @@ wait_input(timo)
     struct timeval *timo;
 {
     int t;
-    struct pollfd pfd;
 
     t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
-    pfd.fd = pppfd;
-    pfd.events = POLLIN | POLLPRI | POLLHUP;
-    if (poll(&pfd, 1, t) < 0 && errno != EINTR) {
-       syslog(LOG_ERR, "poll: %m");
-       die(1);
+    if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR)
+       fatal("poll: %m");
+}
+
+/*
+ * add_fd - add an fd to the set that wait_input waits for.
+ */
+void add_fd(fd)
+    int fd;
+{
+    int n;
+
+    for (n = 0; n < n_pollfds; ++n)
+       if (pollfds[n].fd == fd)
+           return;
+    if (n_pollfds < MAX_POLLFDS) {
+       pollfds[n_pollfds].fd = fd;
+       pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
+       ++n_pollfds;
+    } else
+       error("Too many inputs!");
+}
+
+/*
+ * remove_fd - remove an fd from the set that wait_input waits for.
+ */
+void remove_fd(fd)
+    int fd;
+{
+    int n;
+
+    for (n = 0; n < n_pollfds; ++n) {
+       if (pollfds[n].fd == fd) {
+           while (++n < n_pollfds)
+               pollfds[n-1] = pollfds[n];
+           --n_pollfds;
+           break;
+       }
     }
 }
 
+#if 0
 /*
  * wait_loop_output - wait until there is data available on the
  * loopback, for the length of time specified by *timo (indefinite
@@ -727,11 +760,10 @@ wait_time(timo)
     int n;
 
     n = select(0, NULL, NULL, NULL, timo);
-    if (n < 0 && errno != EINTR) {
-       syslog(LOG_ERR, "select: %m");
-       die(1);
-    }
+    if (n < 0 && errno != EINTR)
+       fatal("select: %m");
 }
+#endif
 
 
 /*
@@ -755,8 +787,7 @@ read_packet(buf)
        if (len < 0) {
            if (errno == EAGAIN || errno == EINTR)
                return -1;
-           syslog(LOG_ERR, "Error reading packet: %m");
-           die(1);
+           fatal("Error reading packet: %m");
        }
 
        if (ctrl.len <= 0)
@@ -767,7 +798,7 @@ read_packet(buf)
         * as a DLPI primitive??
         */
        if (debug)
-           syslog(LOG_DEBUG, "got dlpi prim 0x%x, len=%d",
+           dbglog("got dlpi prim 0x%x, len=%d",
                   ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len);
 
     }
@@ -808,26 +839,26 @@ ppp_send_config(unit, mtu, asyncmap, pcomp, accomp)
     if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
        if (hungup && errno == ENXIO)
            return;
-       syslog(LOG_ERR, "Couldn't set MTU: %m");
+       error("Couldn't set MTU: %m");
     }
     if (fdmuxid >= 0) {
        /* can't set these if we don't have a stream attached below /dev/ppp */
        if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-           syslog(LOG_ERR, "Couldn't set transmit ACCM: %m");
+           error("Couldn't set transmit ACCM: %m");
        }
        cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
        cf[1] = COMP_PROT | COMP_AC;
        if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-           syslog(LOG_ERR, "Couldn't set prot/AC compression: %m");
+           error("Couldn't set prot/AC compression: %m");
        }
     }
 
     /* set the MTU for IP as well */
     memset(&ifr, 0, sizeof(ifr));
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
     ifr.ifr_metric = link_mtu;
     if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't set IP MTU: %m");
+       error("Couldn't set IP MTU: %m");
     }
 }
 
@@ -842,7 +873,7 @@ ppp_set_xaccm(unit, accm)
     if (fdmuxid >= 0
        && strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
        if (!hungup || errno != ENXIO)
-           syslog(LOG_WARNING, "Couldn't set extended ACCM: %m");
+           warn("Couldn't set extended ACCM: %m");
     }
 }
 
@@ -862,17 +893,17 @@ ppp_recv_config(unit, mru, asyncmap, pcomp, accomp)
     if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
        if (hungup && errno == ENXIO)
            return;
-       syslog(LOG_ERR, "Couldn't set MRU: %m");
+       error("Couldn't set MRU: %m");
     }
     if (fdmuxid >= 0) {
        /* can't set these if we don't have a stream attached below /dev/ppp */
        if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-           syslog(LOG_ERR, "Couldn't set receive ACCM: %m");
+           error("Couldn't set receive ACCM: %m");
        }
        cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
        cf[1] = DECOMP_PROT | DECOMP_AC;
        if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-           syslog(LOG_ERR, "Couldn't set prot/AC decompression: %m");
+           error("Couldn't set prot/AC decompression: %m");
        }
     }
 }
@@ -905,7 +936,7 @@ ccp_flags_set(unit, isopen, isup)
     cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
     if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
        if (!hungup || errno != ENXIO)
-           syslog(LOG_ERR, "Couldn't set kernel CCP state: %m");
+           error("Couldn't set kernel CCP state: %m");
     }
 }
 
@@ -920,6 +951,25 @@ get_idle_time(u, ip)
     return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
 }
 
+/*
+ * get_ppp_stats - return statistics for the link.
+ */
+int
+get_ppp_stats(u, stats)
+    int u;
+    struct pppd_stats *stats;
+{
+    struct ppp_stats s;
+
+    if (strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
+       error("Couldn't get link statistics: %m");
+       return 0;
+    }
+    stats->bytes_in = s.p.ppp_ibytes;
+    stats->bytes_out = s.p.ppp_obytes;
+    return 1;
+}
+
 #if 0
 /*
  * set_filters - transfer the pass and active filters to the kernel.
@@ -933,14 +983,14 @@ set_filters(pass, active)
     if (pass->bf_len > 0) {
        if (strioctl(pppfd, PPPIO_PASSFILT, pass,
                     sizeof(struct bpf_program), 0) < 0) {
-           syslog(LOG_ERR, "Couldn't set pass-filter in kernel: %m");
+           error("Couldn't set pass-filter in kernel: %m");
            ret = 0;
        }
     }
     if (active->bf_len > 0) {
        if (strioctl(pppfd, PPPIO_ACTIVEFILT, active,
                     sizeof(struct bpf_program), 0) < 0) {
-           syslog(LOG_ERR, "Couldn't set active-filter in kernel: %m");
+           error("Couldn't set active-filter in kernel: %m");
            ret = 0;
        }
     }
@@ -962,7 +1012,7 @@ ccp_fatal_error(unit)
     cf[0] = cf[1] = 0;
     if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
        if (errno != ENXIO && errno != EINVAL)
-           syslog(LOG_ERR, "Couldn't get compression flags: %m");
+           error("Couldn't get compression flags: %m");
        return 0;
     }
     return cf[0] & CCP_FATALERROR;
@@ -982,7 +1032,7 @@ sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
        maxcid[0] = xcidcomp;
        maxcid[1] = 15;         /* XXX should be rmaxcid */
        if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
-           syslog(LOG_ERR, "Couldn't initialize VJ compression: %m");
+           error("Couldn't initialize VJ compression: %m");
        }
     }
 
@@ -991,7 +1041,7 @@ sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
     cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
     if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
        if (vjcomp)
-           syslog(LOG_ERR, "Couldn't enable VJ compression: %m");
+           error("Couldn't enable VJ compression: %m");
     }
 
     return 1;
@@ -1006,14 +1056,14 @@ sifup(u)
 {
     struct ifreq ifr;
 
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
     if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't mark interface up (get): %m");
+       error("Couldn't mark interface up (get): %m");
        return 0;
     }
     ifr.ifr_flags |= IFF_UP;
     if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't mark interface up (set): %m");
+       error("Couldn't mark interface up (set): %m");
        return 0;
     }
     if_is_up = 1;
@@ -1031,14 +1081,14 @@ sifdown(u)
 
     if (ipmuxid < 0)
        return 1;
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
     if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't mark interface down (get): %m");
+       error("Couldn't mark interface down (get): %m");
        return 0;
     }
     ifr.ifr_flags &= ~IFF_UP;
     if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't mark interface down (set): %m");
+       error("Couldn't mark interface down (set): %m");
        return 0;
     }
     if_is_up = 0;
@@ -1059,7 +1109,7 @@ sifnpmode(u, proto, mode)
     npi[0] = proto;
     npi[1] = (int) mode;
     if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) {
-       syslog(LOG_ERR, "ioctl(set NP %d mode to %d): %m", proto, mode);
+       error("ioctl(set NP %d mode to %d): %m", proto, mode);
        return 0;
     }
     return 1;
@@ -1079,17 +1129,17 @@ sifaddr(u, o, h, m)
     int ret = 1;
 
     memset(&ifr, 0, sizeof(ifr));
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
     ifr.ifr_addr.sa_family = AF_INET;
     INET_ADDR(ifr.ifr_addr) = m;
     if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't set IP netmask: %m");
+       error("Couldn't set IP netmask: %m");
        ret = 0;
     }
     ifr.ifr_addr.sa_family = AF_INET;
     INET_ADDR(ifr.ifr_addr) = o;
     if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't set local IP address: %m");
+       error("Couldn't set local IP address: %m");
        ret = 0;
     }
 
@@ -1101,20 +1151,20 @@ sifaddr(u, o, h, m)
        && (ifr.ifr_flags & IFF_POINTOPOINT) == 0) {
        ifr.ifr_flags |= IFF_POINTOPOINT;
        if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-           syslog(LOG_ERR, "Couldn't mark interface pt-to-pt: %m");
+           error("Couldn't mark interface pt-to-pt: %m");
            ret = 0;
        }
     }
     ifr.ifr_dstaddr.sa_family = AF_INET;
     INET_ADDR(ifr.ifr_dstaddr) = h;
     if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't set remote IP address: %m");
+       error("Couldn't set remote IP address: %m");
        ret = 0;
     }
 #if 0  /* now done in ppp_send_config */
     ifr.ifr_metric = link_mtu;
     if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-       syslog(LOG_ERR, "Couldn't set IP MTU: %m");
+       error("Couldn't set IP MTU: %m");
     }
 #endif
 
@@ -1134,9 +1184,9 @@ cifaddr(u, o, h)
 #if defined(__USLC__)          /* was: #if 0 */
     cifroute(unit, ouraddr, hisaddr);
     if (ipmuxid >= 0) {
-       syslog(LOG_NOTICE, "Removing ppp interface unit");
+       notice("Removing ppp interface unit");
        if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) {
-           syslog(LOG_ERR, "Can't remove ppp interface unit: %m");
+           error("Can't remove ppp interface unit: %m");
            return 0;
        }
        ipmuxid = -1;
@@ -1167,7 +1217,7 @@ sifdefaultroute(u, l, g)
     rt.rt_flags = RTF_GATEWAY;
 
     if (ioctl(ipfd, SIOCADDRT, &rt) < 0) {
-       syslog(LOG_ERR, "Can't add default route: %m");
+       error("Can't add default route: %m");
        return 0;
     }
 
@@ -1196,7 +1246,7 @@ cifdefaultroute(u, l, g)
     rt.rt_flags = RTF_GATEWAY;
 
     if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-       syslog(LOG_ERR, "Can't delete default route: %m");
+       error("Can't delete default route: %m");
        return 0;
     }
 
@@ -1222,7 +1272,7 @@ sifproxyarp(unit, hisaddr)
     INET_ADDR(arpreq.arp_pa) = hisaddr;
     arpreq.arp_flags = ATF_PERM | ATF_PUBL;
     if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
-       syslog(LOG_ERR, "Couldn't set proxy ARP entry: %m");
+       error("Couldn't set proxy ARP entry: %m");
        return 0;
     }
 
@@ -1244,7 +1294,7 @@ cifproxyarp(unit, hisaddr)
     arpreq.arp_pa.sa_family = AF_INET;
     INET_ADDR(arpreq.arp_pa) = hisaddr;
     if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-       syslog(LOG_ERR, "Couldn't delete proxy ARP entry: %m");
+       error("Couldn't delete proxy ARP entry: %m");
        return 0;
     }
 
@@ -1280,7 +1330,7 @@ get_ether_addr(ipaddr, hwaddr)
     if (ifc.ifc_buf == 0)
        return 0;
     if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-       syslog(LOG_WARNING, "Couldn't get system interface list: %m");
+       warn("Couldn't get system interface list: %m");
        free(ifc.ifc_buf);
        return 0;
     }
@@ -1291,7 +1341,7 @@ get_ether_addr(ipaddr, hwaddr)
        /*
         * Check that the interface is up, and not point-to-point or loopback.
         */
-       strncpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
+       strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
        if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
            continue;
        if ((ifreq.ifr_flags &
@@ -1310,14 +1360,14 @@ get_ether_addr(ipaddr, hwaddr)
     }
 
     if (ifr >= ifend) {
-       syslog(LOG_WARNING, "No suitable interface found for proxy ARP");
+       warn("No suitable interface found for proxy ARP");
        free(ifc.ifc_buf);
        return 0;
     }
 
-    syslog(LOG_INFO, "found interface %s for proxy ARP", ifr->ifr_name);
+    info("found interface %s for proxy ARP", ifr->ifr_name);
     if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) {
-       syslog(LOG_ERR, "Couldn't get hardware address for %s", ifr->ifr_name);
+       error("Couldn't get hardware address for %s", ifr->ifr_name);
        free(ifc.ifc_buf);
        return 0;
     }
@@ -1347,7 +1397,7 @@ get_hw_addr(name, ina, hwaddr)
     req.arp_pa.sa_family = AF_INET;
     INET_ADDR(req.arp_pa) = ina;
     if (ioctl(s, SIOCGARP, &req) < 0) {
-       syslog(LOG_ERR, "Couldn't get ARP entry for %s: %m", ip_ntoa(ina));
+       error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina));
        return 0;
     }
     *hwaddr = req.arp_ha;
@@ -1367,19 +1417,19 @@ get_hw_addr(name, ina, hwaddr)
      * We have to open the device and ask it for its hardware address.
      * First split apart the device name and unit.
      */
-    strcpy(ifdev, "/dev/");
-    q = ifdev + 5;             /* strlen("/dev/") */
-    while (*name != 0 && !isdigit(*name))
-       *q++ = *name++;
-    *q = 0;
-    unit = atoi(name);
+    slprintf(ifdev, sizeof(ifdev), "/dev/%s", name);
+    for (q = ifdev + strlen(ifdev); --q >= ifdev; )
+       if (!isdigit(*q))
+           break;
+    unit = atoi(q+1);
+    q[1] = 0;
 
     /*
      * Open the device and do a DLPI attach and phys_addr_req.
      */
     iffd = open(ifdev, O_RDWR);
     if (iffd < 0) {
-       syslog(LOG_ERR, "Can't open %s: %m", ifdev);
+       error("Can't open %s: %m", ifdev);
        return 0;
     }
     if (dlpi_attach(iffd, unit) < 0
@@ -1463,7 +1513,7 @@ dlpi_get_reply(fd, reply, expected_prim, maxlen)
 
     if (buf.len < sizeof(ulong)) {
        if (debug)
-           syslog(LOG_DEBUG, "dlpi response short (len=%d)\n", buf.len);
+           dbglog("dlpi response short (len=%d)\n", buf.len);
        return -1;
     }
 
@@ -1472,11 +1522,11 @@ dlpi_get_reply(fd, reply, expected_prim, maxlen)
 
     if (debug) {
        if (reply->dl_primitive == DL_ERROR_ACK) {
-           syslog(LOG_DEBUG, "dlpi error %d (unix errno %d) for prim %x\n",
+           dbglog("dlpi error %d (unix errno %d) for prim %x\n",
                   reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno,
                   reply->error_ack.dl_error_primitive);
        } else {
-           syslog(LOG_DEBUG, "dlpi unexpected response prim %x\n",
+           dbglog("dlpi unexpected response prim %x\n",
                   reply->dl_primitive);
        }
     }
@@ -1523,7 +1573,7 @@ GetMask(addr)
     if (ifc.ifc_buf == 0)
        return mask;
     if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-       syslog(LOG_WARNING, "Couldn't get system interface list: %m");
+       warn("Couldn't get system interface list: %m");
        free(ifc.ifc_buf);
        return mask;
     }
@@ -1540,7 +1590,7 @@ GetMask(addr)
        /*
         * Check that the interface is up, and not point-to-point or loopback.
         */
-       strncpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
+       strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
        if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
            continue;
        if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
@@ -1590,7 +1640,7 @@ get_host_seed()
     char buf[32];
 
     if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) {
-       syslog(LOG_ERR, "sysinfo: %m");
+       error("sysinfo: %m");
        return 0;
     }
     return (int) strtoul(buf, NULL, 16);
@@ -1610,11 +1660,12 @@ strioctl(fd, cmd, ptr, ilen, olen)
     if (ioctl(fd, I_STR, &str) == -1)
        return -1;
     if (str.ic_len != olen)
-       syslog(LOG_DEBUG, "strioctl: expected %d bytes, got %d for cmd %x\n",
+       dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
               olen, str.ic_len, cmd);
     return 0;
 }
 
+#if 0
 /*
  * lock - create a lock file for the named lock device
  */
@@ -1631,15 +1682,16 @@ lock(dev)
     char ascii_pid[12];
 
     if (stat(dev, &sbuf) < 0) {
-       syslog(LOG_ERR, "Can't get device number for %s: %m", dev);
+       error("Can't get device number for %s: %m", dev);
        return -1;
     }
     if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
-       syslog(LOG_ERR, "Can't lock %s: not a character device", dev);
+       error("Can't lock %s: not a character device", dev);
        return -1;
     }
-    sprintf(lock_file, "%s%03d.%03d.%03d", LOCK_PREFIX, major(sbuf.st_dev),
-           major(sbuf.st_rdev), minor(sbuf.st_rdev));
+    slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d",
+            LOCK_PREFIX, major(sbuf.st_dev),
+            major(sbuf.st_rdev), minor(sbuf.st_rdev));
 
     while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
        if (errno == EEXIST
@@ -1647,7 +1699,7 @@ lock(dev)
            /* Read the lock file to find out who has the device locked */
            n = read(fd, ascii_pid, 11);
            if (n <= 0) {
-               syslog(LOG_ERR, "Can't read pid from lock file %s", lock_file);
+               error("Can't read pid from lock file %s", lock_file);
                close(fd);
            } else {
                ascii_pid[n] = 0;
@@ -1656,24 +1708,24 @@ lock(dev)
                    /* pid no longer exists - remove the lock file */
                    if (unlink(lock_file) == 0) {
                        close(fd);
-                       syslog(LOG_NOTICE, "Removed stale lock on %s (pid %d)",
+                       notice("Removed stale lock on %s (pid %d)",
                               dev, pid);
                        continue;
                    } else
-                       syslog(LOG_WARNING, "Couldn't remove stale lock on %s",
+                       warn("Couldn't remove stale lock on %s",
                               dev);
                } else
-                   syslog(LOG_NOTICE, "Device %s is locked by pid %d",
+                   notice("Device %s is locked by pid %d",
                           dev, pid);
            }
            close(fd);
        } else
-           syslog(LOG_ERR, "Can't create lock file %s: %m", lock_file);
+           error("Can't create lock file %s: %m", lock_file);
        lock_file[0] = 0;
        return -1;
     }
 
-    sprintf(ascii_pid, "%10d\n", getpid());
+    slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid());
     write(fd, ascii_pid, 11);
 
     close(fd);
@@ -1691,7 +1743,7 @@ unlock()
        lock_file[0] = 0;
     }
 }
-
+#endif
 
 /*
  * cifroute - delete a route through the addresses given.
@@ -1711,7 +1763,7 @@ cifroute(u, our, his)
     rt.rt_flags = RTF_HOST;
 
     if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-       syslog(LOG_ERR, "Can't delete route: %m");
+       error("Can't delete route: %m");
        return 0;
     }
 
@@ -1733,6 +1785,7 @@ int
 have_route_to(addr)
     u_int32_t addr;
 {
+#ifdef SOL2
     int fd, r, flags, i;
     struct {
        struct T_optmgmt_req req;
@@ -1750,7 +1803,7 @@ have_route_to(addr)
 
     fd = open("/dev/ip", O_RDWR);
     if (fd < 0) {
-       syslog(LOG_WARNING, "have_route_to: couldn't open /dev/ip: %m");
+       warn("have_route_to: couldn't open /dev/ip: %m");
        return -1;
     }
 
@@ -1767,7 +1820,7 @@ have_route_to(addr)
     cbuf.len = sizeof(req);
 
     if (putmsg(fd, &cbuf, NULL, 0) == -1) {
-       syslog(LOG_WARNING, "have_route_to: putmsg: %m");
+       warn("have_route_to: putmsg: %m");
        close(fd);
        return -1;
     }
@@ -1780,7 +1833,7 @@ have_route_to(addr)
        flags = 0;
        r = getmsg(fd, &cbuf, &dbuf, &flags);
        if (r == -1) {
-           syslog(LOG_WARNING, "have_route_to: getmsg: %m");
+           warn("have_route_to: getmsg: %m");
            close(fd);
            return -1;
        }
@@ -1789,7 +1842,7 @@ have_route_to(addr)
            || ack.ack.PRIM_type != T_OPTMGMT_ACK
            || ack.ack.MGMT_flags != T_SUCCESS
            || ack.ack.OPT_length < sizeof(struct opthdr)) {
-           syslog(LOG_DEBUG, "have_route_to: bad message len=%d prim=%d",
+           dbglog("have_route_to: bad message len=%d prim=%d",
                   cbuf.len, ack.ack.PRIM_type);
            close(fd);
            return -1;
@@ -1808,7 +1861,7 @@ have_route_to(addr)
            nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t);
            for (rp = routes, i = 0; i < nroutes; ++i, ++rp) {
                if (rp->ipRouteMask != ~0) {
-                   syslog(LOG_DEBUG, "have_route_to: dest=%x gw=%x mask=%x\n",
+                   dbglog("have_route_to: dest=%x gw=%x mask=%x\n",
                           rp->ipRouteDest, rp->ipRouteNextHop,
                           rp->ipRouteMask);
                    if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0
@@ -1823,4 +1876,58 @@ have_route_to(addr)
     }
     close(fd);
     return 0;
+#else
+    return -1;
+#endif /* SOL2 */
+}
+
+/*
+ * get_pty - get a pty master/slave pair and chown the slave side to
+ * the uid given.  Assumes slave_name points to MAXPATHLEN bytes of space.
+ */
+int
+get_pty(master_fdp, slave_fdp, slave_name, uid)
+    int *master_fdp;
+    int *slave_fdp;
+    char *slave_name;
+    int uid;
+{
+    int mfd, sfd;
+    char *pty_name;
+    struct termios tios;
+
+    mfd = open("/dev/ptmx", O_RDWR);
+    if (mfd < 0) {
+       error("Couldn't open pty master: %m");
+       return 0;
+    }
+
+    pty_name = ptsname(mfd);
+    if (pty_name == NULL) {
+       error("Couldn't get name of pty slave");
+       close(mfd);
+       return 0;
+    }
+    if (chown(pty_name, uid, -1) < 0)
+       warn("Couldn't change owner of pty slave: %m");
+    if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0)
+       warn("Couldn't change permissions on pty slave: %m");
+    if (unlockpt(mfd) < 0)
+       warn("Couldn't unlock pty slave: %m");
+
+    sfd = open(pty_name, O_RDWR);
+    if (sfd < 0) {
+       error("Couldn't open pty slave %s: %m", pty_name);
+       close(mfd);
+       return 0;
+    }
+    if (ioctl(sfd, I_PUSH, "ptem") < 0)
+       warn("Couldn't push ptem module on pty slave: %m");
+
+    dbglog("Using %s", pty_name);
+    strlcpy(slave_name, pty_name, MAXPATHLEN);
+    *master_fdp = mfd;
+    *slave_fdp = sfd;
+
+    return 1;
 }