typo

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 229708a12b1cfa5947cb6af24e00cae18f283a73..339dde77d569a6859bf6e8b5b107004912235f29 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -1,5 +1,5 @@
 .\" manual page [] for pppd 2.4
 .\" manual page [] for pppd 2.4

-.\" $Id: pppd.8,v 1.60 2002/03/01 14:39:18 dfs Exp $
+.\" $Id: pppd.8,v 1.65 2002/09/20 06:53:19 fcusack Exp $

 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph
 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph


@@ -191,7 +191,7 @@ except that qualifiers which are inappropriate for a PPP link, such as
 \fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
 expression should be enclosed in single-quotes to prevent whitespace
 in the expression from being interpreted by the shell. This option
 \fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
 expression should be enclosed in single-quotes to prevent whitespace
 in the expression from being interpreted by the shell. This option

-is currently only available under NetBSD, and then only
+is currently only available under NetBSD or Linux, and then only

 if both the kernel and pppd were compiled with PPP_FILTER defined.
 .TP
 .B allow-ip \fIaddress(es)
 if both the kernel and pppd were compiled with PPP_FILTER defined.
 .TP
 .B allow-ip \fIaddress(es)


@@ -561,6 +561,10 @@ control, as for the \fIcrtscts\fR option.
 Enables the use of PPP multilink; this is an alias for the `multilink'
 option.  This option is currently only available under Linux.
 .TP
 Enables the use of PPP multilink; this is an alias for the `multilink'
 option.  This option is currently only available under Linux.
 .TP

+.B mppe-stateful
+Allow MPPE to use stateful mode.  Stateless mode is still attempted first.
+The default is to disallow stateful mode.  
+.TP

 .B mpshortseq
 Enables the use of short (12-bit) sequence numbers in multilink
 headers, as opposed to 24-bit sequence numbers.  This option is only
 .B mpshortseq
 Enables the use of short (12-bit) sequence numbers in multilink
 headers, as opposed to 24-bit sequence numbers.  This option is only


@@ -703,6 +707,18 @@ peer is buggy.
 Disables the use of PPP multilink.  This option is currently only
 available under Linux.
 .TP
 Disables the use of PPP multilink.  This option is currently only
 available under Linux.
 .TP

+.B nomppe
+Disables MPPE (Microsoft Point to Point Encryption).  This is the default.
+.TP
+.B nomppe-40
+Disable 40\-bit encryption with MPPE.
+.TP
+.B nomppe-128
+Disable 128\-bit encryption with MPPE.
+.TP
+.B nomppe-stateful
+Disable MPPE stateful mode.  This is the default.
+.TP

 .B nompshortseq
 Disables the use of short (12-bit) sequence numbers in the PPP
 multilink protocol, forcing the use of 24-bit sequence numbers.  This
 .B nompshortseq
 Disables the use of short (12-bit) sequence numbers in the PPP
 multilink protocol, forcing the use of 24-bit sequence numbers.  This


@@ -857,6 +873,10 @@ peer using CHAP.
 With this option, pppd will not agree to authenticate itself to the
 peer using MS-CHAP.
 .TP
 With this option, pppd will not agree to authenticate itself to the
 peer using MS-CHAP.
 .TP

+.B refuse-mschap-v2
+With this option, pppd will not agree to authenticate itself to the
+peer using MS-CHAPv2.
+.TP

 .B refuse-pap
 With this option, pppd will not agree to authenticate itself to the
 peer using PAP.
 .B refuse-pap
 With this option, pppd will not agree to authenticate itself to the
 peer using PAP.


@@ -865,10 +885,28 @@ peer using PAP.
 Require the peer to authenticate itself using CHAP [Challenge
 Handshake Authentication Protocol] authentication.
 .TP
 Require the peer to authenticate itself using CHAP [Challenge
 Handshake Authentication Protocol] authentication.
 .TP

+.B require-mppe
+Require the use of MPPE (Microsoft Point to Point Encryption).  This
+option disables all other compression types.  This option enables
+both 40\-bit and 128\-bit encryption.  In order for MPPE to successfully
+come up, you must have authenticated with either MS-CHAP or MS-CHAPv2.
+This option is presently only supported under Linux, and only if your
+kernel has been configured to include MPPE support.
+.TP
+.B require-mppe-40
+Require the use of MPPE, with 40\-bit encryption.
+.TP
+.B require-mppe-128
+Require the use of MPPE, with 128\-bit encryption.
+.TP

 .B require-mschap
 Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
 Handshake Authentication Protocol] authentication.
 .TP
 .B require-mschap
 Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
 Handshake Authentication Protocol] authentication.
 .TP

+.B require-mschap-v2
+Require the peer to authenticate itself using MS-CHAPv2 [Microsft Challenge
+Handshake Authentication Protocol, Version 2] authentication.
+.TP

 .B require-pap
 Require the peer to authenticate itself using PAP [Password
 Authentication Protocol] authentication.
 .B require-pap
 Require the peer to authenticate itself using PAP [Password
 Authentication Protocol] authentication.


@@ -1020,7 +1058,8 @@ pppd will not agree to authenticate itself with a particular protocol
 if it has no secrets which could be used to do so.
 .LP
 Pppd stores secrets for use in authentication in secrets
 if it has no secrets which could be used to do so.
 .LP
 Pppd stores secrets for use in authentication in secrets

-files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for CHAP/MS-CHAP).
+files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for
+CHAP/MS-CHAP/MS-CHAPv2).

 Both secrets files have the same format.  The secrets files can
 contain secrets for pppd to use in authenticating itself to other
 systems, as well as secrets for pppd to use when authenticating other
 Both secrets files have the same format.  The secrets files can
 contain secrets for pppd to use in authenticating itself to other
 systems, as well as secrets for pppd to use when authenticating other


@@ -1498,7 +1537,8 @@ script.
 .B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
 Process-ID for pppd process on ppp interface unit \fIn\fR.
 .TP
 .B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
 Process-ID for pppd process on ppp interface unit \fIn\fR.
 .TP

-.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)
+.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux),
+\fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)

 Process-ID for pppd process for logical link \fIname\fR (see the
 \fIlinkname\fR option).
 .TP
 Process-ID for pppd process for logical link \fIname\fR (see the
 \fIlinkname\fR option).
 .TP


@@ -1508,8 +1548,8 @@ file should be owned by root and not readable or writable by any other
 user.  Pppd will log a warning if this is not the case.
 .TP
 .B /etc/ppp/chap-secrets
 user.  Pppd will log a warning if this is not the case.
 .TP
 .B /etc/ppp/chap-secrets

-Names, secrets and IP addresses for CHAP/MS-CHAP authentication.  As for
-/etc/ppp/pap-secrets, this file should be owned by root and not
+Names, secrets and IP addresses for CHAP/MS-CHAP/MS-CHAPv2 authentication.
+As for /etc/ppp/pap-secrets, this file should be owned by root and not

 readable or writable by any other user.  Pppd will log a warning if
 this is not the case.
 .TP
 readable or writable by any other user.  Pppd will log a warning if
 this is not the case.
 .TP