]> git.ozlabs.org Git - ppp.git/blobdiff - pppd/main.c
Added log messages for LCP Identification, Time-Remaining, and other
[ppp.git] / pppd / main.c
index ffeaca09a91f5f639a1212ae5dec04bef6bf69c4..f136a281291b297e8b81ace181b57397f0764d2a 100644 (file)
@@ -66,7 +66,7 @@
  * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#define RCSID  "$Id: main.c,v 1.146 2004/11/12 11:21:41 paulus Exp $"
+#define RCSID  "$Id: main.c,v 1.149 2004/11/14 22:53:42 carlsonj Exp $"
 
 #include <stdio.h>
 #include <ctype.h>
@@ -172,6 +172,7 @@ int devfd = -1;                     /* fd of underlying device */
 int fd_ppp = -1;               /* fd for talking PPP */
 int phase;                     /* where the link is at */
 int kill_link;
+int asked_to_quit;
 int open_ccp_flag;
 int listen_time;
 int got_sigusr2;
@@ -481,14 +482,8 @@ main(argc, argv)
        /*
         * Open the loopback channel and set it up to be the ppp interface.
         */
-#ifdef USE_TDB
-       tdb_writelock(pppdb);
-#endif
        fd_loop = open_ppp_loopback();
        set_ifunit(1);
-#ifdef USE_TDB
-       tdb_writeunlock(pppdb);
-#endif
        /*
         * Configure the interface and mark it up, etc.
         */
@@ -517,13 +512,13 @@ main(argc, argv)
            add_fd(fd_loop);
            for (;;) {
                handle_events();
-               if (kill_link && !persist)
+               if (asked_to_quit)
                    break;
                if (get_loop_output())
                    break;
            }
            remove_fd(fd_loop);
-           if (kill_link && !persist)
+           if (asked_to_quit)
                break;
 
            /*
@@ -542,9 +537,10 @@ main(argc, argv)
        while (phase != PHASE_DEAD) {
            handle_events();
            get_input();
-           if (kill_link) {
-               bundle_terminating = 1;
+           if (kill_link)
                lcp_close(0, "User request");
+           if (asked_to_quit) {
+               bundle_terminating = 1;
                if (phase == PHASE_MASTER)
                    mp_bundle_terminated();
            }
@@ -556,7 +552,7 @@ main(argc, argv)
            }
        }
 
-       if (!persist || (maxfail > 0 && unsuccess >= maxfail))
+       if (!persist || asked_to_quit || (maxfail > 0 && unsuccess >= maxfail))
            break;
 
        if (demand)
@@ -630,6 +626,7 @@ handle_events()
     if (got_sigterm) {
        info("Terminating on signal %d", got_sigterm);
        kill_link = 1;
+       asked_to_quit = 1;
        persist = 0;
        status = EXIT_USER_REQUEST;
        got_sigterm = 0;
@@ -892,14 +889,54 @@ struct protocol_list {
     { 0x4b,    "SNA over 802.2" },
     { 0x4d,    "SNA" },
     { 0x4f,    "IP6 Header Compression" },
+    { 0x51,    "KNX Bridging Data" },
+    { 0x53,    "Encryption" },
+    { 0x55,    "Individual Link Encryption" },
+    { 0x57,    "IPv6" },
+    { 0x59,    "PPP Muxing" },
+    { 0x5b,    "Vendor-Specific Network Protocol" },
+    { 0x61,    "RTP IPHC Full Header" },
+    { 0x63,    "RTP IPHC Compressed TCP" },
+    { 0x65,    "RTP IPHC Compressed non-TCP" },
+    { 0x67,    "RTP IPHC Compressed UDP 8" },
+    { 0x69,    "RTP IPHC Compressed RTP 8" },
     { 0x6f,    "Stampede Bridging" },
+    { 0x73,    "MP+" },
+    { 0xc1,    "NTCITS IPI" },
     { 0xfb,    "single-link compression" },
-    { 0xfd,    "1st choice compression" },
+    { 0xfd,    "Compressed Datagram" },
     { 0x0201,  "802.1d Hello Packets" },
     { 0x0203,  "IBM Source Routing BPDU" },
     { 0x0205,  "DEC LANBridge100 Spanning Tree" },
+    { 0x0207,  "Cisco Discovery Protocol" },
+    { 0x0209,  "Netcs Twin Routing" },
+    { 0x020b,  "STP - Scheduled Transfer Protocol" },
+    { 0x020d,  "EDP - Extreme Discovery Protocol" },
+    { 0x0211,  "Optical Supervisory Channel Protocol" },
+    { 0x0213,  "Optical Supervisory Channel Protocol" },
     { 0x0231,  "Luxcom" },
     { 0x0233,  "Sigma Network Systems" },
+    { 0x0235,  "Apple Client Server Protocol" },
+    { 0x0281,  "MPLS Unicast" },
+    { 0x0283,  "MPLS Multicast" },
+    { 0x0285,  "IEEE p1284.4 standard - data packets" },
+    { 0x0287,  "ETSI TETRA Network Protocol Type 1" },
+    { 0x0289,  "Multichannel Flow Treatment Protocol" },
+    { 0x2063,  "RTP IPHC Compressed TCP No Delta" },
+    { 0x2065,  "RTP IPHC Context State" },
+    { 0x2067,  "RTP IPHC Compressed UDP 16" },
+    { 0x2069,  "RTP IPHC Compressed RTP 16" },
+    { 0x4001,  "Cray Communications Control Protocol" },
+    { 0x4003,  "CDPD Mobile Network Registration Protocol" },
+    { 0x4005,  "Expand accelerator protocol" },
+    { 0x4007,  "ODSICP NCP" },
+    { 0x4009,  "DOCSIS DLL" },
+    { 0x400B,  "Cetacean Network Detection Protocol" },
+    { 0x4021,  "Stacker LZS" },
+    { 0x4023,  "RefTek Protocol" },
+    { 0x4025,  "Fibre Channel" },
+    { 0x4027,  "EMIT Protocols" },
+    { 0x405b,  "Vendor-Specific Protocol (VSP)" },
     { 0x8021,  "Internet Protocol Control Protocol" },
     { 0x8023,  "OSI Network Layer Control Protocol" },
     { 0x8025,  "Xerox NS IDP Control Protocol" },
@@ -919,17 +956,43 @@ struct protocol_list {
     { 0x804b,  "SNA over 802.2 Control Protocol" },
     { 0x804d,  "SNA Control Protocol" },
     { 0x804f,  "IP6 Header Compression Control Protocol" },
-    { 0x006f,  "Stampede Bridging Control Protocol" },
+    { 0x8051,  "KNX Bridging Control Protocol" },
+    { 0x8053,  "Encryption Control Protocol" },
+    { 0x8055,  "Individual Link Encryption Control Protocol" },
+    { 0x8057,  "IPv6 Control Protovol" },
+    { 0x8059,  "PPP Muxing Control Protocol" },
+    { 0x805b,  "Vendor-Specific Network Control Protocol (VSNCP)" },
+    { 0x806f,  "Stampede Bridging Control Protocol" },
+    { 0x8073,  "MP+ Control Protocol" },
+    { 0x80c1,  "NTCITS IPI Control Protocol" },
     { 0x80fb,  "Single Link Compression Control Protocol" },
     { 0x80fd,  "Compression Control Protocol" },
+    { 0x8207,  "Cisco Discovery Protocol Control" },
+    { 0x8209,  "Netcs Twin Routing" },
+    { 0x820b,  "STP - Control Protocol" },
+    { 0x820d,  "EDPCP - Extreme Discovery Protocol Ctrl Prtcl" },
+    { 0x8235,  "Apple Client Server Protocol Control" },
+    { 0x8281,  "MPLSCP" },
+    { 0x8285,  "IEEE p1284.4 standard - Protocol Control" },
+    { 0x8287,  "ETSI TETRA TNP1 Control Protocol" },
+    { 0x8289,  "Multichannel Flow Treatment Protocol" },
     { 0xc021,  "Link Control Protocol" },
     { 0xc023,  "Password Authentication Protocol" },
     { 0xc025,  "Link Quality Report" },
     { 0xc027,  "Shiva Password Authentication Protocol" },
     { 0xc029,  "CallBack Control Protocol (CBCP)" },
+    { 0xc02b,  "BACP Bandwidth Allocation Control Protocol" },
+    { 0xc02d,  "BAP" },
+    { 0xc05b,  "Vendor-Specific Authentication Protocol (VSAP)" },
     { 0xc081,  "Container Control Protocol" },
     { 0xc223,  "Challenge Handshake Authentication Protocol" },
+    { 0xc225,  "RSA Authentication Protocol" },
+    { 0xc227,  "Extensible Authentication Protocol" },
+    { 0xc229,  "Mitsubishi Security Info Exch Ptcl (SIEP)" },
+    { 0xc26f,  "Stampede Bridging Authorization Protocol" },
     { 0xc281,  "Proprietary Authentication Protocol" },
+    { 0xc283,  "Proprietary Authentication Protocol" },
+    { 0xc481,  "Proprietary Node ID Authentication Protocol" },
     { 0,       NULL },
 };
 
@@ -1923,6 +1986,41 @@ script_unsetenv(var)
 #endif
 }
 
+/*
+ * Any arbitrary string used as a key for locking the database.
+ * It doesn't matter what it is as long as all pppds use the same string.
+ */
+#define PPPD_LOCK_KEY  "pppd lock"
+
+/*
+ * lock_db - get an exclusive lock on the TDB database.
+ * Used to ensure atomicity of various lookup/modify operations.
+ */
+void lock_db()
+{
+#ifdef USE_TDB
+       TDB_DATA key;
+
+       key.dptr = PPPD_LOCK_KEY;
+       key.dsize = strlen(key.dptr);
+       tdb_chainlock(pppdb, key);
+#endif
+}
+
+/*
+ * unlock_db - remove the exclusive lock obtained by lock_db.
+ */
+void unlock_db()
+{
+#ifdef USE_TDB
+       TDB_DATA key;
+
+       key.dptr = PPPD_LOCK_KEY;
+       key.dsize = strlen(key.dptr);
+       tdb_chainunlock(pppdb, key);
+#endif
+}
+
 #ifdef USE_TDB
 /*
  * update_db_entry - update our entry in the database.