/*
* main.c - Point-to-Point Protocol main module
*
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
+ * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved.
*
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. The name "Carnegie Mellon University" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For permission or any legal
+ * details, please contact
+ * Office of Technology Transfer
+ * Carnegie Mellon University
+ * 5000 Forbes Avenue
+ * Pittsburgh, PA 15213-3890
+ * (412) 268-4387, fax: (412) 268-7395
+ * tech-transfer@andrew.cmu.edu
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by Computing Services
+ * at Carnegie Mellon University (http://www.cmu.edu/computing/)."
+ *
+ * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
+ * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Copyright (c) 1999-2004 Paul Mackerras. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. The name(s) of the authors of this software must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission.
+ *
+ * 3. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by Paul Mackerras
+ * <paulus@samba.org>".
+ *
+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#define RCSID "$Id: main.c,v 1.98 2000/04/29 12:32:59 paulus Exp $"
+#define RCSID "$Id: main.c,v 1.156 2008/06/23 11:47:18 paulus Exp $"
#include <stdio.h>
#include <ctype.h>
#include "ipv6cp.h"
#endif
#include "upap.h"
-#include "chap.h"
+#include "chap-new.h"
+#include "eap.h"
#include "ccp.h"
+#include "ecp.h"
#include "pathnames.h"
-#include "patchlevel.h"
+
+#ifdef USE_TDB
#include "tdb.h"
+#endif
#ifdef CBCP_SUPPORT
#include "cbcp.h"
static const char rcsid[] = RCSID;
/* interface vars */
-char ifname[32]; /* Interface name */
+char ifname[MAXIFNAMELEN]; /* Interface name */
int ifunit; /* Interface unit number */
+struct channel *the_channel;
+
char *progname; /* Name of this program */
char hostname[MAXNAMELEN]; /* Our hostname */
static char pidfilename[MAXPATHLEN]; /* name of pid file */
static char linkpidfile[MAXPATHLEN]; /* name of linkname pid file */
-static char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */
-static uid_t uid; /* Our real user-id */
-static int conn_running; /* we have a [dis]connector running */
+char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */
+uid_t uid; /* Our real user-id */
+struct notifier *pidchange = NULL;
+struct notifier *phasechange = NULL;
+struct notifier *exitnotify = NULL;
+struct notifier *sigreceived = NULL;
+struct notifier *fork_notifier = NULL;
-int ttyfd; /* Serial port file descriptor */
-mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */
-int baud_rate; /* Actual bits/second for serial device */
int hungup; /* terminal has been hung up */
int privileged; /* we're running as real uid root */
int need_holdoff; /* need holdoff period before restarting */
int detached; /* have detached from terminal */
-struct stat devstat; /* result of stat() on devnam */
-int prepass = 0; /* doing prepass to find device name */
-int devnam_fixed; /* set while in options.ttyxx file */
volatile int status; /* exit status for pppd */
int unsuccess; /* # unsuccessful connection attempts */
int do_callback; /* != 0 if we should do callback next */
int doing_callback; /* != 0 if we are doing callback */
-char *callback_script; /* script for doing callback */
+int ppp_session_number; /* Session number, for channels with such a
+ concept (eg PPPoE) */
+int childwait_done; /* have timed out waiting for children */
+
+#ifdef USE_TDB
TDB_CONTEXT *pppdb; /* database for storing status etc. */
+#endif
+
char db_key[32];
int (*holdoff_hook) __P((void)) = NULL;
int (*new_phase_hook) __P((int)) = NULL;
+void (*snoop_recv_hook) __P((unsigned char *p, int len)) = NULL;
+void (*snoop_send_hook) __P((unsigned char *p, int len)) = NULL;
-static int fd_ppp = -1; /* fd for talking PPP */
+static int conn_running; /* we have a [dis]connector running */
static int fd_loop; /* fd for getting demand-dial packets */
-static int pty_master; /* fd for master side of pty */
-static int pty_slave; /* fd for slave side of pty */
-static int real_ttyfd; /* fd for actual serial port (not pty) */
+int fd_devnull; /* fd for /dev/null */
+int devfd = -1; /* fd of underlying device */
+int fd_ppp = -1; /* fd for talking PPP */
int phase; /* where the link is at */
int kill_link;
+int asked_to_quit;
int open_ccp_flag;
+int listen_time;
+int got_sigusr2;
+int got_sigterm;
+int got_sighup;
+static sigset_t signals_handled;
static int waiting;
static sigjmp_buf sigjmp;
static int n_children; /* # child processes still running */
static int got_sigchld; /* set if we have received a SIGCHLD */
-static int locked; /* lock() has succeeded */
-static int privopen; /* don't lock, open device as root */
+int privopen; /* don't lock, open device as root */
char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
static struct timeval start_time; /* Time when link was started. */
+static struct pppd_stats old_link_stats;
struct pppd_stats link_stats;
-int link_connect_time;
+unsigned link_connect_time;
int link_stats_valid;
-static int charshunt_pid; /* Process ID for charshunt */
+int error_count;
+
+bool bundle_eof;
+bool bundle_terminating;
/*
* We maintain a list of child process pids and
char *prog;
void (*done) __P((void *));
void *arg;
+ int killable;
struct subprocess *next;
};
/* Prototypes for procedures local to this file. */
static void setup_signals __P((void));
-static void create_pidfile __P((void));
-static void create_linkpidfile __P((void));
+static void create_pidfile __P((int pid));
+static void create_linkpidfile __P((int pid));
static void cleanup __P((void));
-static void close_tty __P((void));
static void get_input __P((void));
static void calltimeout __P((void));
static struct timeval *timeleft __P((struct timeval *));
static void open_ccp __P((int));
static void bad_signal __P((int));
static void holdoff_end __P((void *));
-static int device_script __P((char *, int, int, int));
-static int reap_kids __P((int waitfor));
-static void record_child __P((int, char *, void (*) (void *), void *));
+static void forget_child __P((int pid, int status));
+static int reap_kids __P((void));
+static void childwait_end __P((void *));
+
+#ifdef USE_TDB
static void update_db_entry __P((void));
static void add_db_key __P((const char *));
static void delete_db_key __P((const char *));
static void cleanup_db __P((void));
-static int open_socket __P((char *));
-static int start_charshunt __P((int, int));
-static void charshunt_done __P((void *));
-static void charshunt __P((int, int, char *));
-static int record_write __P((FILE *, int code, u_char *buf, int nb,
- struct timeval *));
-
-extern char *ttyname __P((int));
+#endif
+
+static void handle_events __P((void));
+void print_link_stats __P((void));
+
extern char *getlogin __P((void));
int main __P((int, char *[]));
&ipv6cp_protent,
#endif
&ccp_protent,
+ &ecp_protent,
#ifdef IPX_CHANGE
&ipxcp_protent,
#endif
#ifdef AT_CHANGE
&atcp_protent,
#endif
+ &eap_protent,
NULL
};
-/*
- * If PPP_DRV_NAME is not defined, use the legacy "ppp" as the
- * device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
int
main(argc, argv)
int argc;
char *argv[];
{
- int i, fdflags, t;
- char *p, *connector;
+ int i, t;
+ char *p;
struct passwd *pw;
- struct timeval timo;
- sigset_t mask;
struct protent *protp;
- struct stat statbuf;
char numbuf[16];
+ link_stats_valid = 0;
new_phase(PHASE_INITIALIZE);
- /*
- * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else.
- * This way we can close 0, 1, 2 in detach() without clobbering
- * a fd that we are using.
- */
- if ((i = open("/dev/null", O_RDWR)) >= 0) {
- while (0 <= i && i <= 2)
- i = dup(i);
- if (i >= 0)
- close(i);
- }
-
script_env = NULL;
/* Initialize syslog facilities */
magic_init();
/*
- * Initialize to the standard option set, then parse, in order,
- * the system options file, the user's options file,
- * the tty's options file, and the command line arguments.
+ * Initialize each protocol.
*/
for (i = 0; (protp = protocols[i]) != NULL; ++i)
(*protp->init)(0);
- progname = *argv;
-
- prepass = 0;
- if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
- || !options_from_user())
- exit(EXIT_OPTION_ERROR);
+ /*
+ * Initialize the default channel.
+ */
+ tty_init();
- /* scan command line and options files to find device name */
- prepass = 1;
- parse_args(argc-1, argv+1);
- prepass = 0;
+ progname = *argv;
/*
- * Work out the device name, if it hasn't already been specified.
+ * Parse, in order, the system options file, the user's options file,
+ * and the command line arguments.
*/
- using_pty = notty || ptycommand != NULL || pty_socket != NULL;
- if (!using_pty && default_device) {
- char *p;
- if (!isatty(0) || (p = ttyname(0)) == NULL) {
- option_error("no device specified and stdin is not a tty");
- exit(EXIT_OPTION_ERROR);
- }
- strlcpy(devnam, p, sizeof(devnam));
- if (stat(devnam, &devstat) < 0)
- fatal("Couldn't stat default device %s: %m", devnam);
- }
+ if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
+ || !options_from_user()
+ || !parse_args(argc-1, argv+1))
+ exit(EXIT_OPTION_ERROR);
+ devnam_fixed = 1; /* can no longer change device name */
/*
- * Parse the tty options file and the command line.
- * The per-tty options file should not change
- * ptycommand, pty_socket, notty or devnam.
+ * Work out the device name, if it hasn't already been specified,
+ * and parse the tty's options file.
*/
- devnam_fixed = 1;
- if (!using_pty) {
- if (!options_for_tty())
- exit(EXIT_OPTION_ERROR);
- }
+ if (the_channel->process_extra_options)
+ (*the_channel->process_extra_options)();
- devnam_fixed = 0;
- if (!parse_args(argc-1, argv+1))
- exit(EXIT_OPTION_ERROR);
+ if (debug)
+ setlogmask(LOG_UPTO(LOG_DEBUG));
/*
* Check that we are running as root.
}
if (!ppp_available()) {
- option_error(no_ppp_msg);
+ option_error("%s", no_ppp_msg);
exit(EXIT_NO_KERNEL_SUPPORT);
}
/*
* Check that the options given are valid and consistent.
*/
+ check_options();
if (!sys_check_options())
exit(EXIT_OPTION_ERROR);
auth_check_options();
for (i = 0; (protp = protocols[i]) != NULL; ++i)
if (protp->check_options != NULL)
(*protp->check_options)();
- if (demand && connect_script == 0) {
- option_error("connect script is required for demand-dialling\n");
- exit(EXIT_OPTION_ERROR);
- }
- /* default holdoff to 0 if no connect script has been given */
- if (connect_script == 0 && !holdoff_specified)
- holdoff = 0;
-
- if (using_pty) {
- if (!default_device) {
- option_error("%s option precludes specifying device name",
- notty? "notty": "pty");
- exit(EXIT_OPTION_ERROR);
- }
- if (ptycommand != NULL && notty) {
- option_error("pty option is incompatible with notty option");
- exit(EXIT_OPTION_ERROR);
- }
- if (pty_socket != NULL && (ptycommand != NULL || notty)) {
- option_error("socket option is incompatible with pty and notty");
- exit(EXIT_OPTION_ERROR);
- }
- default_device = notty;
- lockflag = 0;
- modem = 0;
- if (notty && log_to_fd <= 1)
- log_to_fd = -1;
- } else {
- /*
- * If the user has specified a device which is the same as
- * the one on stdin, pretend they didn't specify any.
- * If the device is already open read/write on stdin,
- * we assume we don't need to lock it, and we can open it as root.
- */
- if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode)
- && statbuf.st_rdev == devstat.st_rdev) {
- default_device = 1;
- fdflags = fcntl(0, F_GETFL);
- if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR)
- privopen = 1;
- }
+ if (the_channel->check_options)
+ (*the_channel->check_options)();
+
+
+ if (dump_options || dryrun) {
+ init_pr_log(NULL, LOG_INFO);
+ print_options(pr_log, NULL);
+ end_pr_log();
}
- if (default_device)
- nodetach = 1;
- /*
- * Don't send log messages to the serial port, it tends to
- * confuse the peer. :-)
- */
- if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0
- && S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev)
- log_to_fd = -1;
+ if (dryrun)
+ die(0);
+
+ /* Make sure fds 0, 1, 2 are open to somewhere. */
+ fd_devnull = open(_PATH_DEVNULL, O_RDWR);
+ if (fd_devnull < 0)
+ fatal("Couldn't open %s: %m", _PATH_DEVNULL);
+ while (fd_devnull <= 2) {
+ i = dup(fd_devnull);
+ if (i < 0)
+ fatal("Critical shortage of file descriptors: dup failed: %m");
+ fd_devnull = i;
+ }
/*
* Initialize system-dependent stuff.
*/
sys_init();
- if (debug)
- setlogmask(LOG_UPTO(LOG_DEBUG));
+#ifdef USE_TDB
pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
if (pppdb != NULL) {
slprintf(db_key, sizeof(db_key), "pppd%d", getpid());
multilink = 0;
}
}
+#endif
/*
* Detach ourselves from the terminal, if required,
else
p = "(unknown)";
}
- syslog(LOG_NOTICE, "pppd %s.%d%s started by %s, uid %d",
- VERSION, PATCHLEVEL, IMPLEMENTATION, p, uid);
+ syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid);
script_setenv("PPPLOGNAME", p, 0);
if (devnam[0])
setup_signals();
- waiting = 0;
+ create_linkpidfile(getpid());
- create_linkpidfile();
+ waiting = 0;
/*
* If we're doing dial-on-demand, set up the interface now.
/*
* Open the loopback channel and set it up to be the ppp interface.
*/
- tdb_writelock(pppdb);
fd_loop = open_ppp_loopback();
set_ifunit(1);
- tdb_writeunlock(pppdb);
-
/*
* Configure the interface and mark it up, etc.
*/
do_callback = 0;
for (;;) {
+ bundle_eof = 0;
+ bundle_terminating = 0;
+ listen_time = 0;
need_holdoff = 1;
- ttyfd = -1;
- real_ttyfd = -1;
+ devfd = -1;
status = EXIT_OK;
++unsuccess;
doing_callback = do_callback;
/*
* Don't do anything until we see some activity.
*/
- kill_link = 0;
new_phase(PHASE_DORMANT);
demand_unblock();
add_fd(fd_loop);
for (;;) {
- if (sigsetjmp(sigjmp, 1) == 0) {
- sigprocmask(SIG_BLOCK, &mask, NULL);
- if (kill_link || got_sigchld) {
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- } else {
- waiting = 1;
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- wait_input(timeleft(&timo));
- }
- }
- waiting = 0;
- calltimeout();
- if (kill_link) {
- if (!persist)
- break;
- kill_link = 0;
- }
+ handle_events();
+ if (asked_to_quit)
+ break;
if (get_loop_output())
break;
- if (got_sigchld)
- reap_kids(0);
}
remove_fd(fd_loop);
- if (kill_link && !persist)
+ if (asked_to_quit)
break;
/*
info("Starting link");
}
- new_phase(PHASE_SERIALCONN);
-
- /*
- * Get a pty master/slave pair if the pty, notty, socket,
- * or record options were specified.
- */
- strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
- pty_master = -1;
- pty_slave = -1;
- if (using_pty || record_file != NULL) {
- if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
- error("Couldn't allocate pseudo-tty");
- status = EXIT_FATAL_ERROR;
- goto fail;
- }
- set_up_tty(pty_slave, 1);
- }
-
- /*
- * Lock the device if we've been asked to.
- */
- status = EXIT_LOCK_FAILED;
- if (lockflag && !privopen) {
- if (lock(devnam) < 0)
- goto fail;
- locked = 1;
- }
-
- /*
- * Open the serial device and set it up to be the ppp interface.
- * First we open it in non-blocking mode so we can set the
- * various termios flags appropriately. If we aren't dialling
- * out and we want to use the modem lines, we reopen it later
- * in order to wait for the carrier detect signal from the modem.
- */
- hungup = 0;
- kill_link = 0;
- connector = doing_callback? callback_script: connect_script;
- if (devnam[0] != 0) {
- for (;;) {
- /* If the user specified the device name, become the
- user before opening it. */
- int err;
- if (!devnam_info.priv && !privopen)
- seteuid(uid);
- ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
- err = errno;
- if (!devnam_info.priv && !privopen)
- seteuid(0);
- if (ttyfd >= 0)
- break;
- errno = err;
- if (err != EINTR) {
- error("Failed to open %s: %m", devnam);
- status = EXIT_OPEN_FAILED;
- }
- if (!persist || err != EINTR)
- goto fail;
- }
- if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
- || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
- warn("Couldn't reset non-blocking mode on device: %m");
-
- /*
- * Do the equivalent of `mesg n' to stop broadcast messages.
- */
- if (fstat(ttyfd, &statbuf) < 0
- || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
- warn("Couldn't restrict write permissions to %s: %m", devnam);
- } else
- tty_mode = statbuf.st_mode;
-
- /*
- * Set line speed, flow control, etc.
- * If we have a non-null connection or initializer script,
- * on most systems we set CLOCAL for now so that we can talk
- * to the modem before carrier comes up. But this has the
- * side effect that we might miss it if CD drops before we
- * get to clear CLOCAL below. On systems where we can talk
- * successfully to the modem with CLOCAL clear and CD down,
- * we could clear CLOCAL at this point.
- */
- set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0)
- || initializer != NULL));
- real_ttyfd = ttyfd;
- }
-
- /*
- * If the pty, socket, notty and/or record option was specified,
- * start up the character shunt now.
- */
- status = EXIT_PTYCMD_FAILED;
- if (ptycommand != NULL) {
- if (record_file != NULL) {
- int ipipe[2], opipe[2], ok;
-
- if (pipe(ipipe) < 0 || pipe(opipe) < 0)
- fatal("Couldn't create pipes for record option: %m");
- ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
- && start_charshunt(ipipe[0], opipe[1]);
- close(ipipe[0]);
- close(ipipe[1]);
- close(opipe[0]);
- close(opipe[1]);
- if (!ok)
- goto fail;
- } else {
- if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
- goto fail;
- ttyfd = pty_slave;
- close(pty_master);
- pty_master = -1;
- }
- } else if (pty_socket != NULL) {
- int fd = open_socket(pty_socket);
- if (fd < 0)
- goto fail;
- if (!start_charshunt(fd, fd))
- goto fail;
- } else if (notty) {
- if (!start_charshunt(0, 1))
- goto fail;
- } else if (record_file != NULL) {
- if (!start_charshunt(ttyfd, ttyfd))
- goto fail;
- }
-
- /* run connection script */
- if ((connector && connector[0]) || initializer) {
- if (real_ttyfd != -1) {
- /* XXX do this if doing_callback == CALLBACK_DIALIN? */
- if (!default_device && modem) {
- setdtr(real_ttyfd, 0); /* in case modem is off hook */
- sleep(1);
- setdtr(real_ttyfd, 1);
- }
- }
-
- if (initializer && initializer[0]) {
- if (device_script(initializer, ttyfd, ttyfd, 0) < 0) {
- error("Initializer script failed");
- status = EXIT_INIT_FAILED;
- goto fail;
- }
- if (kill_link)
- goto disconnect;
-
- info("Serial port initialized.");
- }
-
- if (connector && connector[0]) {
- if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
- error("Connect script failed");
- status = EXIT_CONNECT_FAILED;
- goto fail;
- }
- if (kill_link)
- goto disconnect;
-
- info("Serial connection established.");
- }
-
- /* set line speed, flow control, etc.;
- clear CLOCAL if modem option */
- if (real_ttyfd != -1)
- set_up_tty(real_ttyfd, 0);
-
- if (doing_callback == CALLBACK_DIALIN)
- connector = NULL;
- }
-
- /* reopen tty if necessary to wait for carrier */
- if (connector == NULL && modem && devnam[0] != 0) {
- for (;;) {
- if ((i = open(devnam, O_RDWR)) >= 0)
- break;
- if (errno != EINTR) {
- error("Failed to reopen %s: %m", devnam);
- status = EXIT_OPEN_FAILED;
- }
- if (!persist || errno != EINTR || hungup || kill_link)
- goto fail;
- }
- close(i);
- }
-
- slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
- script_setenv("SPEED", numbuf, 0);
-
- /* run welcome script, if any */
- if (welcomer && welcomer[0]) {
- if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
- warn("Welcome script failed");
- }
-
- /* set up the serial device as a ppp interface */
- tdb_writelock(pppdb);
- fd_ppp = establish_ppp(ttyfd);
- if (fd_ppp < 0) {
- tdb_writeunlock(pppdb);
- status = EXIT_FATAL_ERROR;
- goto disconnect;
- }
-
- if (!demand && ifunit >= 0)
- set_ifunit(1);
- tdb_writeunlock(pppdb);
-
- /*
- * Start opening the connection and wait for
- * incoming events (reply, timeout, etc.).
- */
- notice("Connect: %s <--> %s", ifname, ppp_devnam);
gettimeofday(&start_time, NULL);
- link_stats_valid = 0;
script_unsetenv("CONNECT_TIME");
script_unsetenv("BYTES_SENT");
script_unsetenv("BYTES_RCVD");
- lcp_lowerup(0);
-
- /*
- * If we are initiating this connection, wait for a short
- * time for something from the peer. This can avoid bouncing
- * our packets off his tty before he has it set up.
- */
- add_fd(fd_ppp);
- if (connect_delay != 0 && (connector != NULL || ptycommand != NULL)) {
- struct timeval t;
- t.tv_sec = connect_delay / 1000;
- t.tv_usec = connect_delay % 1000;
- wait_input(&t);
- }
lcp_open(0); /* Start protocol */
- open_ccp_flag = 0;
- status = EXIT_NEGOTIATION_FAILED;
- new_phase(PHASE_ESTABLISH);
+ start_link(0);
while (phase != PHASE_DEAD) {
- if (sigsetjmp(sigjmp, 1) == 0) {
- sigprocmask(SIG_BLOCK, &mask, NULL);
- if (kill_link || open_ccp_flag || got_sigchld) {
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- } else {
- waiting = 1;
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- wait_input(timeleft(&timo));
- }
- }
- waiting = 0;
- calltimeout();
+ handle_events();
get_input();
- if (kill_link) {
+ if (kill_link)
lcp_close(0, "User request");
- kill_link = 0;
+ if (asked_to_quit) {
+ bundle_terminating = 1;
+ if (phase == PHASE_MASTER)
+ mp_bundle_terminated();
}
if (open_ccp_flag) {
if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
(*ccp_protent.open)(0);
}
- open_ccp_flag = 0;
- }
- if (got_sigchld)
- reap_kids(0); /* Don't leave dead kids lying around */
- }
-
- /*
- * Print connect time and statistics.
- */
- if (link_stats_valid) {
- int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */
- info("Connect time %d.%d minutes.", t/10, t%10);
- info("Sent %d bytes, received %d bytes.",
- link_stats.bytes_out, link_stats.bytes_in);
- }
-
- /*
- * Delete pid file before disestablishing ppp. Otherwise it
- * can happen that another pppd gets the same unit and then
- * we delete its pid file.
- */
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
- /*
- * If we may want to bring the link up again, transfer
- * the ppp unit back to the loopback. Set the
- * real serial device back to its normal mode of operation.
- */
- remove_fd(fd_ppp);
- clean_check();
- if (demand)
- restore_loop();
- disestablish_ppp(ttyfd);
- fd_ppp = -1;
- if (!hungup)
- lcp_lowerdown(0);
- if (!demand)
- script_unsetenv("IFNAME");
-
- /*
- * Run disconnector script, if requested.
- * XXX we may not be able to do this if the line has hung up!
- */
- disconnect:
- if (disconnect_script && !hungup) {
- new_phase(PHASE_DISCONNECT);
- if (real_ttyfd >= 0)
- set_up_tty(real_ttyfd, 1);
- if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) {
- warn("disconnect script failed");
- } else {
- info("Serial link disconnected.");
}
}
+ /* restore FSMs to original state */
+ lcp_close(0, "");
- fail:
- if (pty_master >= 0)
- close(pty_master);
- if (pty_slave >= 0)
- close(pty_slave);
- if (real_ttyfd >= 0)
- close_tty();
- if (locked) {
- unlock();
- locked = 0;
- }
-
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
- if (!persist || (maxfail > 0 && unsuccess >= maxfail))
+ if (!persist || asked_to_quit || (maxfail > 0 && unsuccess >= maxfail))
break;
- kill_link = 0;
if (demand)
demand_discard();
t = need_holdoff? holdoff: 0;
new_phase(PHASE_HOLDOFF);
TIMEOUT(holdoff_end, NULL, t);
do {
- if (sigsetjmp(sigjmp, 1) == 0) {
- sigprocmask(SIG_BLOCK, &mask, NULL);
- if (kill_link || got_sigchld) {
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- } else {
- waiting = 1;
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- wait_input(timeleft(&timo));
- }
- }
- waiting = 0;
- calltimeout();
- if (kill_link) {
- kill_link = 0;
+ handle_events();
+ if (kill_link)
new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
- }
- if (got_sigchld)
- reap_kids(0);
} while (phase == PHASE_HOLDOFF);
if (!persist)
break;
}
/* Wait for scripts to finish */
- /* XXX should have a timeout here */
- while (n_children > 0) {
+ reap_kids();
+ if (n_children > 0) {
+ if (child_wait > 0)
+ TIMEOUT(childwait_end, NULL, child_wait);
if (debug) {
struct subprocess *chp;
dbglog("Waiting for %d child processes...", n_children);
for (chp = children; chp != NULL; chp = chp->next)
dbglog(" script %s, pid %d", chp->prog, chp->pid);
}
- if (reap_kids(1) < 0)
- break;
+ while (n_children > 0 && !childwait_done) {
+ handle_events();
+ if (kill_link && !childwait_done)
+ childwait_end(NULL);
+ }
}
die(status);
return 0;
}
+/*
+ * handle_events - wait for something to happen and respond to it.
+ */
+static void
+handle_events()
+{
+ struct timeval timo;
+
+ kill_link = open_ccp_flag = 0;
+ if (sigsetjmp(sigjmp, 1) == 0) {
+ sigprocmask(SIG_BLOCK, &signals_handled, NULL);
+ if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
+ sigprocmask(SIG_UNBLOCK, &signals_handled, NULL);
+ } else {
+ waiting = 1;
+ sigprocmask(SIG_UNBLOCK, &signals_handled, NULL);
+ wait_input(timeleft(&timo));
+ }
+ }
+ waiting = 0;
+ calltimeout();
+ if (got_sighup) {
+ info("Hangup (SIGHUP)");
+ kill_link = 1;
+ got_sighup = 0;
+ if (status != EXIT_HANGUP)
+ status = EXIT_USER_REQUEST;
+ }
+ if (got_sigterm) {
+ info("Terminating on signal %d", got_sigterm);
+ kill_link = 1;
+ asked_to_quit = 1;
+ persist = 0;
+ status = EXIT_USER_REQUEST;
+ got_sigterm = 0;
+ }
+ if (got_sigchld) {
+ got_sigchld = 0;
+ reap_kids(); /* Don't leave dead kids lying around */
+ }
+ if (got_sigusr2) {
+ open_ccp_flag = 1;
+ got_sigusr2 = 0;
+ }
+}
+
/*
* setup_signals - initialize signal handling.
*/
setup_signals()
{
struct sigaction sa;
- sigset_t mask;
/*
* Compute mask of all interesting signals and install signal handlers
* for each. Only one signal handler may be active at a time. Therefore,
* all other signals should be masked when any handler is executing.
*/
- sigemptyset(&mask);
- sigaddset(&mask, SIGHUP);
- sigaddset(&mask, SIGINT);
- sigaddset(&mask, SIGTERM);
- sigaddset(&mask, SIGCHLD);
- sigaddset(&mask, SIGUSR2);
+ sigemptyset(&signals_handled);
+ sigaddset(&signals_handled, SIGHUP);
+ sigaddset(&signals_handled, SIGINT);
+ sigaddset(&signals_handled, SIGTERM);
+ sigaddset(&signals_handled, SIGCHLD);
+ sigaddset(&signals_handled, SIGUSR2);
#define SIGNAL(s, handler) do { \
sa.sa_handler = handler; \
fatal("Couldn't establish signal handler (%d): %m", s); \
} while (0)
- sa.sa_mask = mask;
+ sa.sa_mask = signals_handled;
sa.sa_flags = 0;
SIGNAL(SIGHUP, hup); /* Hangup */
SIGNAL(SIGINT, term); /* Interrupt */
set_ifunit(iskey)
int iskey;
{
- info("Using interface %s%d", PPP_DRV_NAME, ifunit);
- slprintf(ifname, sizeof(ifname), PPP_DRV_NAME "%d", ifunit);
+ if (req_ifname[0] != '\0')
+ slprintf(ifname, sizeof(ifname), "%s", req_ifname);
+ else
+ slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
+ info("Using interface %s", ifname);
script_setenv("IFNAME", ifname, iskey);
if (iskey) {
- create_pidfile(); /* write pid to file */
- create_linkpidfile();
+ create_pidfile(getpid()); /* write pid to file */
+ create_linkpidfile(getpid());
}
}
{
int pid;
char numbuf[16];
+ int pipefd[2];
if (detached)
return;
+ if (pipe(pipefd) == -1)
+ pipefd[0] = pipefd[1] = -1;
if ((pid = fork()) < 0) {
error("Couldn't detach (fork failed: %m)");
die(1); /* or just return? */
}
if (pid != 0) {
/* parent */
- if (locked)
- relock(pid);
+ notify(pidchange, pid);
+ /* update pid files if they have been written already */
+ if (pidfilename[0])
+ create_pidfile(pid);
+ if (linkpidfile[0])
+ create_linkpidfile(pid);
exit(0); /* parent dies */
}
setsid();
chdir("/");
- close(0);
- close(1);
- close(2);
+ dup2(fd_devnull, 0);
+ dup2(fd_devnull, 1);
+ dup2(fd_devnull, 2);
detached = 1;
- if (!log_to_file && !log_to_specific_fd)
+ if (log_default)
log_to_fd = -1;
- /* update pid files if they have been written already */
- if (pidfilename[0])
- create_pidfile();
- if (linkpidfile[0])
- create_linkpidfile();
slprintf(numbuf, sizeof(numbuf), "%d", getpid());
script_setenv("PPPD_PID", numbuf, 1);
+
+ /* wait for parent to finish updating pid & lock files and die */
+ close(pipefd[1]);
+ complete_read(pipefd[0], numbuf, 1);
+ close(pipefd[0]);
}
/*
void
reopen_log()
{
-#ifdef ULTRIX
- openlog("pppd", LOG_PID);
-#else
openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
setlogmask(LOG_UPTO(LOG_INFO));
-#endif
}
/*
* Create a file containing our process ID.
*/
static void
-create_pidfile()
+create_pidfile(pid)
+ int pid;
{
FILE *pidfile;
slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
_PATH_VARRUN, ifname);
if ((pidfile = fopen(pidfilename, "w")) != NULL) {
- fprintf(pidfile, "%d\n", getpid());
+ fprintf(pidfile, "%d\n", pid);
(void) fclose(pidfile);
} else {
error("Failed to create pid file %s: %m", pidfilename);
}
}
-static void
-create_linkpidfile()
+void
+create_linkpidfile(pid)
+ int pid;
{
FILE *pidfile;
slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid",
_PATH_VARRUN, linkname);
if ((pidfile = fopen(linkpidfile, "w")) != NULL) {
- fprintf(pidfile, "%d\n", getpid());
+ fprintf(pidfile, "%d\n", pid);
if (ifname[0])
fprintf(pidfile, "%s\n", ifname);
(void) fclose(pidfile);
}
}
+/*
+ * remove_pidfile - remove our pid files
+ */
+void remove_pidfiles()
+{
+ if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", pidfilename);
+ pidfilename[0] = 0;
+ if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", linkpidfile);
+ linkpidfile[0] = 0;
+}
+
/*
* holdoff_end - called via a timeout when the holdoff period ends.
*/
{ 0x4b, "SNA over 802.2" },
{ 0x4d, "SNA" },
{ 0x4f, "IP6 Header Compression" },
+ { 0x51, "KNX Bridging Data" },
+ { 0x53, "Encryption" },
+ { 0x55, "Individual Link Encryption" },
+ { 0x57, "IPv6" },
+ { 0x59, "PPP Muxing" },
+ { 0x5b, "Vendor-Specific Network Protocol" },
+ { 0x61, "RTP IPHC Full Header" },
+ { 0x63, "RTP IPHC Compressed TCP" },
+ { 0x65, "RTP IPHC Compressed non-TCP" },
+ { 0x67, "RTP IPHC Compressed UDP 8" },
+ { 0x69, "RTP IPHC Compressed RTP 8" },
{ 0x6f, "Stampede Bridging" },
+ { 0x73, "MP+" },
+ { 0xc1, "NTCITS IPI" },
{ 0xfb, "single-link compression" },
- { 0xfd, "1st choice compression" },
+ { 0xfd, "Compressed Datagram" },
{ 0x0201, "802.1d Hello Packets" },
{ 0x0203, "IBM Source Routing BPDU" },
{ 0x0205, "DEC LANBridge100 Spanning Tree" },
+ { 0x0207, "Cisco Discovery Protocol" },
+ { 0x0209, "Netcs Twin Routing" },
+ { 0x020b, "STP - Scheduled Transfer Protocol" },
+ { 0x020d, "EDP - Extreme Discovery Protocol" },
+ { 0x0211, "Optical Supervisory Channel Protocol" },
+ { 0x0213, "Optical Supervisory Channel Protocol" },
{ 0x0231, "Luxcom" },
{ 0x0233, "Sigma Network Systems" },
+ { 0x0235, "Apple Client Server Protocol" },
+ { 0x0281, "MPLS Unicast" },
+ { 0x0283, "MPLS Multicast" },
+ { 0x0285, "IEEE p1284.4 standard - data packets" },
+ { 0x0287, "ETSI TETRA Network Protocol Type 1" },
+ { 0x0289, "Multichannel Flow Treatment Protocol" },
+ { 0x2063, "RTP IPHC Compressed TCP No Delta" },
+ { 0x2065, "RTP IPHC Context State" },
+ { 0x2067, "RTP IPHC Compressed UDP 16" },
+ { 0x2069, "RTP IPHC Compressed RTP 16" },
+ { 0x4001, "Cray Communications Control Protocol" },
+ { 0x4003, "CDPD Mobile Network Registration Protocol" },
+ { 0x4005, "Expand accelerator protocol" },
+ { 0x4007, "ODSICP NCP" },
+ { 0x4009, "DOCSIS DLL" },
+ { 0x400B, "Cetacean Network Detection Protocol" },
+ { 0x4021, "Stacker LZS" },
+ { 0x4023, "RefTek Protocol" },
+ { 0x4025, "Fibre Channel" },
+ { 0x4027, "EMIT Protocols" },
+ { 0x405b, "Vendor-Specific Protocol (VSP)" },
{ 0x8021, "Internet Protocol Control Protocol" },
{ 0x8023, "OSI Network Layer Control Protocol" },
{ 0x8025, "Xerox NS IDP Control Protocol" },
{ 0x804b, "SNA over 802.2 Control Protocol" },
{ 0x804d, "SNA Control Protocol" },
{ 0x804f, "IP6 Header Compression Control Protocol" },
- { 0x006f, "Stampede Bridging Control Protocol" },
+ { 0x8051, "KNX Bridging Control Protocol" },
+ { 0x8053, "Encryption Control Protocol" },
+ { 0x8055, "Individual Link Encryption Control Protocol" },
+ { 0x8057, "IPv6 Control Protocol" },
+ { 0x8059, "PPP Muxing Control Protocol" },
+ { 0x805b, "Vendor-Specific Network Control Protocol (VSNCP)" },
+ { 0x806f, "Stampede Bridging Control Protocol" },
+ { 0x8073, "MP+ Control Protocol" },
+ { 0x80c1, "NTCITS IPI Control Protocol" },
{ 0x80fb, "Single Link Compression Control Protocol" },
{ 0x80fd, "Compression Control Protocol" },
+ { 0x8207, "Cisco Discovery Protocol Control" },
+ { 0x8209, "Netcs Twin Routing" },
+ { 0x820b, "STP - Control Protocol" },
+ { 0x820d, "EDPCP - Extreme Discovery Protocol Ctrl Prtcl" },
+ { 0x8235, "Apple Client Server Protocol Control" },
+ { 0x8281, "MPLSCP" },
+ { 0x8285, "IEEE p1284.4 standard - Protocol Control" },
+ { 0x8287, "ETSI TETRA TNP1 Control Protocol" },
+ { 0x8289, "Multichannel Flow Treatment Protocol" },
{ 0xc021, "Link Control Protocol" },
{ 0xc023, "Password Authentication Protocol" },
{ 0xc025, "Link Quality Report" },
{ 0xc027, "Shiva Password Authentication Protocol" },
{ 0xc029, "CallBack Control Protocol (CBCP)" },
+ { 0xc02b, "BACP Bandwidth Allocation Control Protocol" },
+ { 0xc02d, "BAP" },
+ { 0xc05b, "Vendor-Specific Authentication Protocol (VSAP)" },
{ 0xc081, "Container Control Protocol" },
{ 0xc223, "Challenge Handshake Authentication Protocol" },
+ { 0xc225, "RSA Authentication Protocol" },
+ { 0xc227, "Extensible Authentication Protocol" },
+ { 0xc229, "Mitsubishi Security Info Exch Ptcl (SIEP)" },
+ { 0xc26f, "Stampede Bridging Authorization Protocol" },
{ 0xc281, "Proprietary Authentication Protocol" },
+ { 0xc283, "Proprietary Authentication Protocol" },
+ { 0xc481, "Proprietary Node ID Authentication Protocol" },
{ 0, NULL },
};
return;
if (len == 0) {
+ if (bundle_eof && multilink_master) {
+ notice("Last channel has disconnected");
+ mp_bundle_terminated();
+ return;
+ }
notice("Modem hangup");
hungup = 1;
status = EXIT_HANGUP;
return;
}
- if (debug /*&& (debugflags & DBG_INPACKET)*/)
- dbglog("rcvd %P", p, len);
-
if (len < PPP_HDRLEN) {
- MAINDEBUG(("io(): Received short packet."));
+ dbglog("received short packet:%.*B", len, p);
return;
}
+ dump_packet("rcvd", p, len);
+ if (snoop_recv_hook) snoop_recv_hook(p, len);
+
p += 2; /* Skip address and control */
GETSHORT(protocol, p);
len -= PPP_HDRLEN;
* Toss all non-LCP packets unless LCP is OPEN.
*/
if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
- MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
+ dbglog("Discarded non-LCP packet when LCP not open");
return;
}
*/
if (phase <= PHASE_AUTHENTICATE
&& !(protocol == PPP_LCP || protocol == PPP_LQR
- || protocol == PPP_PAP || protocol == PPP_CHAP)) {
- MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
- protocol, phase));
+ || protocol == PPP_PAP || protocol == PPP_CHAP ||
+ protocol == PPP_EAP)) {
+ dbglog("discarding proto 0x%x in phase %d",
+ protocol, phase);
return;
}
lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
}
+/*
+ * ppp_send_config - configure the transmit-side characteristics of
+ * the ppp interface. Returns -1, indicating an error, if the channel
+ * send_config procedure called error() (or incremented error_count
+ * itself), otherwise 0.
+ */
+int
+ppp_send_config(unit, mtu, accm, pcomp, accomp)
+ int unit, mtu;
+ u_int32_t accm;
+ int pcomp, accomp;
+{
+ int errs;
+
+ if (the_channel->send_config == NULL)
+ return 0;
+ errs = error_count;
+ (*the_channel->send_config)(mtu, accm, pcomp, accomp);
+ return (error_count != errs)? -1: 0;
+}
+
+/*
+ * ppp_recv_config - configure the receive-side characteristics of
+ * the ppp interface. Returns -1, indicating an error, if the channel
+ * recv_config procedure called error() (or incremented error_count
+ * itself), otherwise 0.
+ */
+int
+ppp_recv_config(unit, mru, accm, pcomp, accomp)
+ int unit, mru;
+ u_int32_t accm;
+ int pcomp, accomp;
+{
+ int errs;
+
+ if (the_channel->recv_config == NULL)
+ return 0;
+ errs = error_count;
+ (*the_channel->recv_config)(mru, accm, pcomp, accomp);
+ return (error_count != errs)? -1: 0;
+}
+
/*
* new_phase - signal the start of a new phase of pppd's operation.
*/
phase = p;
if (new_phase_hook)
(*new_phase_hook)(p);
+ notify(phasechange, p);
}
/*
die(status)
int status;
{
+ if (!doing_multilink || multilink_master)
+ print_link_stats();
cleanup();
+ notify(exitnotify, status);
syslog(LOG_INFO, "Exit.");
exit(status);
}
sys_cleanup();
if (fd_ppp >= 0)
- disestablish_ppp(ttyfd);
- if (real_ttyfd >= 0)
- close_tty();
-
- if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", linkpidfile);
- linkpidfile[0] = 0;
-
- if (locked)
- unlock();
+ the_channel->disestablish_ppp(devfd);
+ if (the_channel->cleanup)
+ (*the_channel->cleanup)();
+ remove_pidfiles();
+#ifdef USE_TDB
if (pppdb != NULL)
cleanup_db();
+#endif
+
}
-/*
- * close_tty - restore the terminal device and close it.
- */
-static void
-close_tty()
+void
+print_link_stats()
{
- /* drop dtr to hang up */
- if (!default_device && modem) {
- setdtr(real_ttyfd, 0);
- /*
- * This sleep is in case the serial port has CLOCAL set by default,
- * and consequently will reassert DTR when we close the device.
- */
- sleep(1);
- }
-
- restore_tty(real_ttyfd);
-
- if (tty_mode != (mode_t) -1) {
- if (fchmod(real_ttyfd, tty_mode) != 0) {
- /* XXX if devnam is a symlink, this will change the link */
- chmod(devnam, tty_mode);
- }
+ /*
+ * Print connect time and statistics.
+ */
+ if (link_stats_valid) {
+ int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */
+ info("Connect time %d.%d minutes.", t/10, t%10);
+ info("Sent %u bytes, received %u bytes.",
+ link_stats.bytes_out, link_stats.bytes_in);
+ link_stats_valid = 0;
}
+}
- close(real_ttyfd);
- real_ttyfd = -1;
+/*
+ * reset_link_stats - "reset" stats when link goes up.
+ */
+void
+reset_link_stats(u)
+ int u;
+{
+ if (!get_ppp_stats(u, &old_link_stats))
+ return;
+ gettimeofday(&start_time, NULL);
}
/*
link_connect_time = now.tv_sec - start_time.tv_sec;
link_stats_valid = 1;
- slprintf(numbuf, sizeof(numbuf), "%d", link_connect_time);
+ link_stats.bytes_in -= old_link_stats.bytes_in;
+ link_stats.bytes_out -= old_link_stats.bytes_out;
+ link_stats.pkts_in -= old_link_stats.pkts_in;
+ link_stats.pkts_out -= old_link_stats.pkts_out;
+
+ slprintf(numbuf, sizeof(numbuf), "%u", link_connect_time);
script_setenv("CONNECT_TIME", numbuf, 0);
- slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_out);
+ slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_out);
script_setenv("BYTES_SENT", numbuf, 0);
- slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_in);
+ slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_in);
script_setenv("BYTES_RCVD", numbuf, 0);
}
/*
* timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of seconds, NOT hz (as in
- * the kernel).
*/
void
-timeout(func, arg, time)
+timeout(func, arg, secs, usecs)
void (*func) __P((void *));
void *arg;
- int time;
+ int secs, usecs;
{
struct callout *newp, *p, **pp;
-
- MAINDEBUG(("Timeout %p:%p in %d seconds.", func, arg, time));
-
+
/*
* Allocate timeout.
*/
newp->c_arg = arg;
newp->c_func = func;
gettimeofday(&timenow, NULL);
- newp->c_time.tv_sec = timenow.tv_sec + time;
- newp->c_time.tv_usec = timenow.tv_usec;
-
+ newp->c_time.tv_sec = timenow.tv_sec + secs;
+ newp->c_time.tv_usec = timenow.tv_usec + usecs;
+ if (newp->c_time.tv_usec >= 1000000) {
+ newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000;
+ newp->c_time.tv_usec %= 1000000;
+ }
+
/*
* Find correct place and link it in.
*/
void *arg;
{
struct callout **copp, *freep;
-
- MAINDEBUG(("Untimeout %p:%p.", func, arg));
-
+
/*
* Find first matching timeout and remove it from the list.
*/
/*
* kill_my_pg - send a signal to our process group, and ignore it ourselves.
+ * We assume that sig is currently blocked.
*/
static void
kill_my_pg(sig)
int sig;
{
struct sigaction act, oldact;
+ struct subprocess *chp;
+
+ if (!detached) {
+ /*
+ * There might be other things in our process group that we
+ * didn't start that would get hit if we did a kill(0), so
+ * just send the signal individually to our children.
+ */
+ for (chp = children; chp != NULL; chp = chp->next)
+ if (chp->killable)
+ kill(chp->pid, sig);
+ return;
+ }
+ /* We've done a setsid(), so we can just use a kill(0) */
+ sigemptyset(&act.sa_mask); /* unnecessary in fact */
act.sa_handler = SIG_IGN;
act.sa_flags = 0;
kill(0, sig);
+ /*
+ * The kill() above made the signal pending for us, as well as
+ * the rest of our process group, but we don't want it delivered
+ * to us. It is blocked at the moment. Setting it to be ignored
+ * will cause the pending signal to be discarded. If we did the
+ * kill() after setting the signal to be ignored, it is unspecified
+ * (by POSIX) whether the signal is immediately discarded or left
+ * pending, and in fact Linux would leave it pending, and so it
+ * would be delivered after the current signal handler exits,
+ * leading to an infinite loop.
+ */
sigaction(sig, &act, &oldact);
sigaction(sig, &oldact, NULL);
}
hup(sig)
int sig;
{
- info("Hangup (SIGHUP)");
- kill_link = 1;
- if (status != EXIT_HANGUP)
- status = EXIT_USER_REQUEST;
+ /* can't log a message here, it can deadlock */
+ got_sighup = 1;
if (conn_running)
/* Send the signal to the [dis]connector process(es) also */
kill_my_pg(sig);
- if (charshunt_pid)
- kill(charshunt_pid, sig);
+ notify(sigreceived, sig);
if (waiting)
siglongjmp(sigjmp, 1);
}
term(sig)
int sig;
{
- info("Terminating on signal %d.", sig);
- persist = 0; /* don't try to restart */
- kill_link = 1;
- status = EXIT_USER_REQUEST;
+ /* can't log a message here, it can deadlock */
+ got_sigterm = sig;
if (conn_running)
/* Send the signal to the [dis]connector process(es) also */
kill_my_pg(sig);
- if (charshunt_pid)
- kill(charshunt_pid, sig);
+ notify(sigreceived, sig);
if (waiting)
siglongjmp(sigjmp, 1);
}
open_ccp(sig)
int sig;
{
- open_ccp_flag = 1;
+ got_sigusr2 = 1;
if (waiting)
siglongjmp(sigjmp, 1);
}
error("Fatal signal %d", sig);
if (conn_running)
kill_my_pg(SIGTERM);
- if (charshunt_pid)
- kill(charshunt_pid, SIGTERM);
+ notify(sigreceived, sig);
die(127);
}
+/*
+ * safe_fork - Create a child process. The child closes all the
+ * file descriptors that we don't want to leak to a script.
+ * The parent waits for the child to do this before returning.
+ * This also arranges for the specified fds to be dup'd to
+ * fds 0, 1, 2 in the child.
+ */
+pid_t
+safe_fork(int infd, int outfd, int errfd)
+{
+ pid_t pid;
+ int fd, pipefd[2];
+ char buf[1];
+
+ /* make sure fds 0, 1, 2 are occupied (probably not necessary) */
+ while ((fd = dup(fd_devnull)) >= 0) {
+ if (fd > 2) {
+ close(fd);
+ break;
+ }
+ }
+
+ if (pipe(pipefd) == -1)
+ pipefd[0] = pipefd[1] = -1;
+ pid = fork();
+ if (pid < 0) {
+ error("fork failed: %m");
+ return -1;
+ }
+ if (pid > 0) {
+ /* parent */
+ close(pipefd[1]);
+ /* this read() blocks until the close(pipefd[1]) below */
+ complete_read(pipefd[0], buf, 1);
+ close(pipefd[0]);
+ return pid;
+ }
+
+ /* Executing in the child */
+ sys_close();
+#ifdef USE_TDB
+ tdb_close(pppdb);
+#endif
+
+ /* make sure infd, outfd and errfd won't get tromped on below */
+ if (infd == 1 || infd == 2)
+ infd = dup(infd);
+ if (outfd == 0 || outfd == 2)
+ outfd = dup(outfd);
+ if (errfd == 0 || errfd == 1)
+ errfd = dup(errfd);
+
+ closelog();
+
+ /* dup the in, out, err fds to 0, 1, 2 */
+ if (infd != 0)
+ dup2(infd, 0);
+ if (outfd != 1)
+ dup2(outfd, 1);
+ if (errfd != 2)
+ dup2(errfd, 2);
+
+ if (log_to_fd > 2)
+ close(log_to_fd);
+ if (the_channel->close)
+ (*the_channel->close)();
+ else
+ close(devfd); /* some plugins don't have a close function */
+ close(fd_ppp);
+ close(fd_devnull);
+ if (infd != 0)
+ close(infd);
+ if (outfd != 1)
+ close(outfd);
+ if (errfd != 2)
+ close(errfd);
+
+ notify(fork_notifier, 0);
+ close(pipefd[0]);
+ /* this close unblocks the read() call above in the parent */
+ close(pipefd[1]);
+
+ return 0;
+}
+
+static bool
+add_script_env(pos, newstring)
+ int pos;
+ char *newstring;
+{
+ if (pos + 1 >= s_env_nalloc) {
+ int new_n = pos + 17;
+ char **newenv = realloc(script_env, new_n * sizeof(char *));
+ if (newenv == NULL) {
+ free(newstring - 1);
+ return 0;
+ }
+ script_env = newenv;
+ s_env_nalloc = new_n;
+ }
+ script_env[pos] = newstring;
+ script_env[pos + 1] = NULL;
+ return 1;
+}
+
+static void
+remove_script_env(pos)
+ int pos;
+{
+ free(script_env[pos] - 1);
+ while ((script_env[pos] = script_env[pos + 1]) != NULL)
+ pos++;
+}
+
+/*
+ * update_system_environment - process the list of set/unset options
+ * and update the system environment.
+ */
+static void
+update_system_environment()
+{
+ struct userenv *uep;
+
+ for (uep = userenv_list; uep != NULL; uep = uep->ue_next) {
+ if (uep->ue_isset)
+ setenv(uep->ue_name, uep->ue_value, 1);
+ else
+ unsetenv(uep->ue_name);
+ }
+}
/*
- * device_script - run a program to talk to the serial device
+ * device_script - run a program to talk to the specified fds
* (e.g. to run the connector or disconnector script).
+ * stderr gets connected to the log fd or to the _PATH_CONNERRS file.
*/
-static int
+int
device_script(program, in, out, dont_wait)
char *program;
int in, out;
int status = -1;
int errfd;
+ if (log_to_fd >= 0)
+ errfd = log_to_fd;
+ else
+ errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
+
++conn_running;
- pid = fork();
+ pid = safe_fork(in, out, errfd);
+
+ if (pid != 0 && log_to_fd < 0)
+ close(errfd);
if (pid < 0) {
--conn_running;
return -1;
}
- if (pid == 0) {
- sys_close();
- closelog();
- if (in == 2) {
- /* aargh!!! */
- int newin = dup(in);
- if (in == out)
- out = newin;
- in = newin;
- } else if (out == 2) {
- out = dup(out);
- }
- if (log_to_fd >= 0) {
- if (log_to_fd != 2)
- dup2(log_to_fd, 2);
- } else {
- close(2);
- errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
- if (errfd >= 0 && errfd != 2) {
- dup2(errfd, 2);
- close(errfd);
+ if (pid != 0) {
+ record_child(pid, program, NULL, NULL, 1);
+ status = 0;
+ if (!dont_wait) {
+ while (waitpid(pid, &status, 0) < 0) {
+ if (errno == EINTR)
+ continue;
+ fatal("error waiting for (dis)connection process: %m");
}
+ forget_child(pid, status);
+ --conn_running;
}
- if (in != 0) {
- if (out == 0)
- out = dup(out);
- dup2(in, 0);
- }
- if (out != 1) {
- dup2(out, 1);
- }
- if (real_ttyfd > 2)
- close(real_ttyfd);
- if (pty_master > 2)
- close(pty_master);
- if (pty_slave > 2)
- close(pty_slave);
- setuid(uid);
- if (getuid() != uid) {
- error("setuid failed");
- exit(1);
- }
- setgid(getgid());
- execl("/bin/sh", "sh", "-c", program, (char *)0);
- error("could not exec /bin/sh: %m");
- exit(99);
- /* NOTREACHED */
+ return (status == 0 ? 0 : -1);
}
- if (dont_wait) {
- record_child(pid, program, NULL, NULL);
- status = 0;
- } else {
- while (waitpid(pid, &status, 0) < 0) {
- if (errno == EINTR)
+ /* here we are executing in the child */
+
+ setgid(getgid());
+ setuid(uid);
+ if (getuid() != uid) {
+ fprintf(stderr, "pppd: setuid failed\n");
+ exit(1);
+ }
+ update_system_environment();
+ execl("/bin/sh", "sh", "-c", program, (char *)0);
+ perror("pppd: could not exec /bin/sh");
+ _exit(99);
+ /* NOTREACHED */
+}
+
+
+/*
+ * update_script_environment - process the list of set/unset options
+ * and update the script environment. Note that we intentionally do
+ * not update the TDB. These changes are layered on top right before
+ * exec. It is not possible to use script_setenv() or
+ * script_unsetenv() safely after this routine is run.
+ */
+static void
+update_script_environment()
+{
+ struct userenv *uep;
+
+ for (uep = userenv_list; uep != NULL; uep = uep->ue_next) {
+ int i;
+ char *p, *newstring;
+ int nlen = strlen(uep->ue_name);
+
+ for (i = 0; (p = script_env[i]) != NULL; i++) {
+ if (strncmp(p, uep->ue_name, nlen) == 0 && p[nlen] == '=')
+ break;
+ }
+ if (uep->ue_isset) {
+ nlen += strlen(uep->ue_value) + 2;
+ newstring = malloc(nlen + 1);
+ if (newstring == NULL)
continue;
- fatal("error waiting for (dis)connection process: %m");
+ *newstring++ = 0;
+ slprintf(newstring, nlen, "%s=%s", uep->ue_name, uep->ue_value);
+ if (p != NULL)
+ script_env[i] = newstring;
+ else
+ add_script_env(i, newstring);
+ } else {
+ remove_script_env(i);
}
- --conn_running;
}
-
- return (status == 0 ? 0 : -1);
}
-
/*
- * run-program - execute a program with given arguments,
- * but don't wait for it.
+ * run_program - execute a program with given arguments,
+ * but don't wait for it unless wait is non-zero.
* If the program can't be executed, logs an error unless
* must_exist is 0 and the program file doesn't exist.
* Returns -1 if it couldn't fork, 0 if the file doesn't exist
* reap_kids) iff the return value is > 0.
*/
pid_t
-run_program(prog, args, must_exist, done, arg)
+run_program(prog, args, must_exist, done, arg, wait)
char *prog;
char **args;
int must_exist;
void (*done) __P((void *));
void *arg;
+ int wait;
{
- int pid;
+ int pid, status;
struct stat sbuf;
/*
return 0;
}
- pid = fork();
+ pid = safe_fork(fd_devnull, fd_devnull, fd_devnull);
if (pid == -1) {
error("Failed to create child process for %s: %m", prog);
return -1;
}
- if (pid == 0) {
- int new_fd;
-
- /* Leave the current location */
- (void) setsid(); /* No controlling tty. */
- (void) umask (S_IRWXG|S_IRWXO);
- (void) chdir ("/"); /* no current directory. */
- setuid(0); /* set real UID = root */
- setgid(getegid());
-
- /* Ensure that nothing of our device environment is inherited. */
- sys_close();
- closelog();
- close (0);
- close (1);
- close (2);
- close (ttyfd); /* tty interface to the ppp device */
- if (real_ttyfd >= 0)
- close(real_ttyfd);
-
- /* Don't pass handles to the PPP device, even by accident. */
- new_fd = open (_PATH_DEVNULL, O_RDWR);
- if (new_fd >= 0) {
- if (new_fd != 0) {
- dup2 (new_fd, 0); /* stdin <- /dev/null */
- close (new_fd);
+ if (pid != 0) {
+ if (debug)
+ dbglog("Script %s started (pid %d)", prog, pid);
+ record_child(pid, prog, done, arg, 0);
+ if (wait) {
+ while (waitpid(pid, &status, 0) < 0) {
+ if (errno == EINTR)
+ continue;
+ fatal("error waiting for script %s: %m", prog);
}
- dup2 (0, 1); /* stdout -> /dev/null */
- dup2 (0, 2); /* stderr -> /dev/null */
+ forget_child(pid, status);
}
+ return pid;
+ }
+
+ /* Leave the current location */
+ (void) setsid(); /* No controlling tty. */
+ (void) umask (S_IRWXG|S_IRWXO);
+ (void) chdir ("/"); /* no current directory. */
+ setuid(0); /* set real UID = root */
+ setgid(getegid());
#ifdef BSD
- /* Force the priority back to zero if pppd is running higher. */
- if (setpriority (PRIO_PROCESS, 0, 0) < 0)
- warn("can't reset priority to 0: %m");
+ /* Force the priority back to zero if pppd is running higher. */
+ if (setpriority (PRIO_PROCESS, 0, 0) < 0)
+ warn("can't reset priority to 0: %m");
#endif
- /* SysV recommends a second fork at this point. */
-
- /* run the program */
- execve(prog, args, script_env);
- if (must_exist || errno != ENOENT) {
- /* have to reopen the log, there's nowhere else
- for the message to go. */
- reopen_log();
- syslog(LOG_ERR, "Can't execute %s: %m", prog);
- closelog();
- }
- _exit(-1);
+ /* run the program */
+ update_script_environment();
+ execve(prog, args, script_env);
+ if (must_exist || errno != ENOENT) {
+ /* have to reopen the log, there's nowhere else
+ for the message to go. */
+ reopen_log();
+ syslog(LOG_ERR, "Can't execute %s: %m", prog);
+ closelog();
}
-
- if (debug)
- dbglog("Script %s started (pid %d)", prog, pid);
- record_child(pid, prog, done, arg);
-
- return pid;
+ _exit(99);
}
* record_child - add a child process to the list for reap_kids
* to use.
*/
-static void
-record_child(pid, prog, done, arg)
+void
+record_child(pid, prog, done, arg, killable)
int pid;
char *prog;
void (*done) __P((void *));
void *arg;
+ int killable;
{
struct subprocess *chp;
chp->done = done;
chp->arg = arg;
chp->next = children;
+ chp->killable = killable;
children = chp;
}
}
+/*
+ * childwait_end - we got fed up waiting for the child processes to
+ * exit, send them all a SIGTERM.
+ */
+static void
+childwait_end(arg)
+ void *arg;
+{
+ struct subprocess *chp;
+
+ for (chp = children; chp != NULL; chp = chp->next) {
+ if (debug)
+ dbglog("sending SIGTERM to process %d", chp->pid);
+ kill(chp->pid, SIGTERM);
+ }
+ childwait_done = 1;
+}
+
+/*
+ * forget_child - clean up after a dead child
+ */
+static void
+forget_child(pid, status)
+ int pid, status;
+{
+ struct subprocess *chp, **prevp;
+
+ for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
+ if (chp->pid == pid) {
+ --n_children;
+ *prevp = chp->next;
+ break;
+ }
+ }
+ if (WIFSIGNALED(status)) {
+ warn("Child process %s (pid %d) terminated with signal %d",
+ (chp? chp->prog: "??"), pid, WTERMSIG(status));
+ } else if (debug)
+ dbglog("Script %s finished (pid %d), status = 0x%x",
+ (chp? chp->prog: "??"), pid,
+ WIFEXITED(status) ? WEXITSTATUS(status) : status);
+ if (chp && chp->done)
+ (*chp->done)(chp->arg);
+ if (chp)
+ free(chp);
+}
/*
* reap_kids - get status from any dead child processes,
* and log a message for abnormal terminations.
*/
static int
-reap_kids(waitfor)
- int waitfor;
+reap_kids()
{
int pid, status;
- struct subprocess *chp, **prevp;
- got_sigchld = 0;
if (n_children == 0)
return 0;
- while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
- && pid != 0) {
- for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
- if (chp->pid == pid) {
- --n_children;
- *prevp = chp->next;
- break;
- }
- }
- if (WIFSIGNALED(status)) {
- warn("Child process %s (pid %d) terminated with signal %d",
- (chp? chp->prog: "??"), pid, WTERMSIG(status));
- } else if (debug)
- dbglog("Script %s finished (pid %d), status = 0x%x",
- (chp? chp->prog: "??"), pid, status);
- if (chp && chp->done)
- (*chp->done)(chp->arg);
- if (chp)
- free(chp);
+ while ((pid = waitpid(-1, &status, WNOHANG)) != -1 && pid != 0) {
+ forget_child(pid, status);
}
if (pid == -1) {
if (errno == ECHILD)
return 0;
}
+/*
+ * add_notifier - add a new function to be called when something happens.
+ */
+void
+add_notifier(notif, func, arg)
+ struct notifier **notif;
+ notify_func func;
+ void *arg;
+{
+ struct notifier *np;
+
+ np = malloc(sizeof(struct notifier));
+ if (np == 0)
+ novm("notifier struct");
+ np->next = *notif;
+ np->func = func;
+ np->arg = arg;
+ *notif = np;
+}
+
+/*
+ * remove_notifier - remove a function from the list of things to
+ * be called when something happens.
+ */
+void
+remove_notifier(notif, func, arg)
+ struct notifier **notif;
+ notify_func func;
+ void *arg;
+{
+ struct notifier *np;
+
+ for (; (np = *notif) != 0; notif = &np->next) {
+ if (np->func == func && np->arg == arg) {
+ *notif = np->next;
+ free(np);
+ break;
+ }
+ }
+}
+
+/*
+ * notify - call a set of functions registered with add_notifier.
+ */
+void
+notify(notif, val)
+ struct notifier *notif;
+ int val;
+{
+ struct notifier *np;
+
+ while ((np = notif) != 0) {
+ notif = np->next;
+ (*np->func)(np->arg, val);
+ }
+}
/*
* novm - log an error message saying we ran out of memory, and die.
if (script_env != 0) {
for (i = 0; (p = script_env[i]) != 0; ++i) {
if (strncmp(p, var, varl) == 0 && p[varl] == '=') {
+#ifdef USE_TDB
if (p[-1] && pppdb != NULL)
delete_db_key(p);
+#endif
free(p-1);
script_env[i] = newstring;
- if (iskey && pppdb != NULL)
- add_db_key(newstring);
- update_db_entry();
+#ifdef USE_TDB
+ if (pppdb != NULL) {
+ if (iskey)
+ add_db_key(newstring);
+ update_db_entry();
+ }
+#endif
return;
}
}
} else {
/* no space allocated for script env. ptrs. yet */
i = 0;
- script_env = (char **) malloc(16 * sizeof(char *));
- if (script_env == 0)
+ script_env = malloc(16 * sizeof(char *));
+ if (script_env == 0) {
+ free(newstring - 1);
return;
+ }
s_env_nalloc = 16;
}
- /* reallocate script_env with more space if needed */
- if (i + 1 >= s_env_nalloc) {
- int new_n = i + 17;
- char **newenv = (char **) realloc((void *)script_env,
- new_n * sizeof(char *));
- if (newenv == 0)
- return;
- script_env = newenv;
- s_env_nalloc = new_n;
- }
-
- script_env[i] = newstring;
- script_env[i+1] = 0;
+ if (!add_script_env(i, newstring))
+ return;
+#ifdef USE_TDB
if (pppdb != NULL) {
if (iskey)
add_db_key(newstring);
update_db_entry();
}
+#endif
}
/*
return;
for (i = 0; (p = script_env[i]) != 0; ++i) {
if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
+#ifdef USE_TDB
if (p[-1] && pppdb != NULL)
delete_db_key(p);
- free(p-1);
- while ((script_env[i] = script_env[i+1]) != 0)
- ++i;
+#endif
+ remove_script_env(i);
break;
}
}
+#ifdef USE_TDB
if (pppdb != NULL)
update_db_entry();
+#endif
+}
+
+/*
+ * Any arbitrary string used as a key for locking the database.
+ * It doesn't matter what it is as long as all pppds use the same string.
+ */
+#define PPPD_LOCK_KEY "pppd lock"
+
+/*
+ * lock_db - get an exclusive lock on the TDB database.
+ * Used to ensure atomicity of various lookup/modify operations.
+ */
+void lock_db()
+{
+#ifdef USE_TDB
+ TDB_DATA key;
+
+ key.dptr = PPPD_LOCK_KEY;
+ key.dsize = strlen(key.dptr);
+ tdb_chainlock(pppdb, key);
+#endif
}
+/*
+ * unlock_db - remove the exclusive lock obtained by lock_db.
+ */
+void unlock_db()
+{
+#ifdef USE_TDB
+ TDB_DATA key;
+
+ key.dptr = PPPD_LOCK_KEY;
+ key.dsize = strlen(key.dptr);
+ tdb_chainunlock(pppdb, key);
+#endif
+}
+
+#ifdef USE_TDB
/*
* update_db_entry - update our entry in the database.
*/
vlen = 0;
for (i = 0; (p = script_env[i]) != 0; ++i)
vlen += strlen(p) + 1;
- vbuf = malloc(vlen);
+ vbuf = malloc(vlen + 1);
if (vbuf == 0)
novm("database entry");
q = vbuf;
dbuf.dptr = vbuf;
dbuf.dsize = vlen;
if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
- error("tdb_store failed: %s", tdb_error(pppdb));
+ error("tdb_store failed: %s", tdb_errorstr(pppdb));
+
+ if (vbuf)
+ free(vbuf);
}
dbuf.dptr = db_key;
dbuf.dsize = strlen(db_key);
if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
- error("tdb_store key failed: %s", tdb_error(pppdb));
+ error("tdb_store key failed: %s", tdb_errorstr(pppdb));
}
/*
if (p[-1])
delete_db_key(p);
}
-
-/*
- * open_socket - establish a stream socket connection to the nominated
- * host and port.
- */
-static int
-open_socket(dest)
- char *dest;
-{
- char *sep, *endp = NULL;
- int sock, port = -1;
- u_int32_t host;
- struct hostent *hent;
- struct sockaddr_in sad;
-
- /* parse host:port and resolve host to an IP address */
- sep = strchr(dest, ':');
- if (sep != NULL)
- port = strtol(sep+1, &endp, 10);
- if (port < 0 || endp == sep+1 || sep == dest) {
- error("Can't parse host:port for socket destination");
- return -1;
- }
- *sep = 0;
- host = inet_addr(dest);
- if (host == (u_int32_t) -1) {
- hent = gethostbyname(dest);
- if (hent == NULL) {
- error("%s: unknown host in socket option", dest);
- *sep = ':';
- return -1;
- }
- host = *(u_int32_t *)(hent->h_addr_list[0]);
- }
- *sep = ':';
-
- /* get a socket and connect it to the other end */
- sock = socket(PF_INET, SOCK_STREAM, 0);
- if (sock < 0) {
- error("Can't create socket: %m");
- return -1;
- }
- memset(&sad, 0, sizeof(sad));
- sad.sin_family = AF_INET;
- sad.sin_port = htons(port);
- sad.sin_addr.s_addr = host;
- if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) {
- error("Can't connect to %s: %m", dest);
- close(sock);
- return -1;
- }
-
- return sock;
-}
-
-/*
- * start_charshunt - create a child process to run the character shunt.
- */
-static int
-start_charshunt(ifd, ofd)
- int ifd, ofd;
-{
- int cpid;
-
- cpid = fork();
- if (cpid == -1) {
- error("Can't fork process for character shunt: %m");
- return 0;
- }
- if (cpid == 0) {
- /* child */
- close(pty_slave);
- setuid(uid);
- if (getuid() != uid)
- fatal("setuid failed");
- setgid(getgid());
- if (!nodetach)
- log_to_fd = -1;
- charshunt(ifd, ofd, record_file);
- exit(0);
- }
- charshunt_pid = cpid;
- close(pty_master);
- pty_master = -1;
- ttyfd = pty_slave;
- record_child(cpid, "pppd (charshunt)", charshunt_done, NULL);
- return 1;
-}
-
-static void
-charshunt_done(arg)
- void *arg;
-{
- charshunt_pid = 0;
-}
-
-/*
- * charshunt - the character shunt, which passes characters between
- * the pty master side and the serial port (or stdin/stdout).
- * This runs as the user (not as root).
- * (We assume ofd >= ifd which is true the way this gets called. :-).
- */
-static void
-charshunt(ifd, ofd, record_file)
- int ifd, ofd;
- char *record_file;
-{
- int n, nfds;
- fd_set ready, writey;
- u_char *ibufp, *obufp;
- int nibuf, nobuf;
- int flags;
- int pty_readable, stdin_readable;
- struct timeval lasttime;
- FILE *recordf = NULL;
- int ilevel, olevel, max_level;
- struct timeval levelt, tout, *top;
-
- /*
- * Reset signal handlers.
- */
- signal(SIGHUP, SIG_IGN); /* Hangup */
- signal(SIGINT, SIG_DFL); /* Interrupt */
- signal(SIGTERM, SIG_DFL); /* Terminate */
- signal(SIGCHLD, SIG_DFL);
- signal(SIGUSR1, SIG_DFL);
- signal(SIGUSR2, SIG_DFL);
- signal(SIGABRT, SIG_DFL);
- signal(SIGALRM, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGILL, SIG_DFL);
- signal(SIGPIPE, SIG_DFL);
- signal(SIGQUIT, SIG_DFL);
- signal(SIGSEGV, SIG_DFL);
-#ifdef SIGBUS
- signal(SIGBUS, SIG_DFL);
-#endif
-#ifdef SIGEMT
- signal(SIGEMT, SIG_DFL);
-#endif
-#ifdef SIGPOLL
- signal(SIGPOLL, SIG_DFL);
-#endif
-#ifdef SIGPROF
- signal(SIGPROF, SIG_DFL);
-#endif
-#ifdef SIGSYS
- signal(SIGSYS, SIG_DFL);
-#endif
-#ifdef SIGTRAP
- signal(SIGTRAP, SIG_DFL);
-#endif
-#ifdef SIGVTALRM
- signal(SIGVTALRM, SIG_DFL);
-#endif
-#ifdef SIGXCPU
- signal(SIGXCPU, SIG_DFL);
-#endif
-#ifdef SIGXFSZ
- signal(SIGXFSZ, SIG_DFL);
-#endif
-
- /*
- * Open the record file if required.
- */
- if (record_file != NULL) {
- recordf = fopen(record_file, "a");
- if (recordf == NULL)
- error("Couldn't create record file %s: %m", record_file);
- }
-
- /* set all the fds to non-blocking mode */
- flags = fcntl(pty_master, F_GETFL);
- if (flags == -1
- || fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set pty master to nonblock: %m");
- flags = fcntl(ifd, F_GETFL);
- if (flags == -1
- || fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
- if (ofd != ifd) {
- flags = fcntl(ofd, F_GETFL);
- if (flags == -1
- || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set stdout to nonblock: %m");
- }
-
- nibuf = nobuf = 0;
- ibufp = obufp = NULL;
- pty_readable = stdin_readable = 1;
-
- ilevel = olevel = 0;
- gettimeofday(&levelt, NULL);
- if (max_data_rate) {
- max_level = max_data_rate / 10;
- if (max_level < 100)
- max_level = 100;
- } else
- max_level = sizeof(inpacket_buf) + 1;
-
- nfds = (ofd > pty_master? ofd: pty_master) + 1;
- if (recordf != NULL) {
- gettimeofday(&lasttime, NULL);
- putc(7, recordf); /* put start marker */
- putc(lasttime.tv_sec >> 24, recordf);
- putc(lasttime.tv_sec >> 16, recordf);
- putc(lasttime.tv_sec >> 8, recordf);
- putc(lasttime.tv_sec, recordf);
- lasttime.tv_usec = 0;
- }
-
- while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
- top = 0;
- tout.tv_sec = 0;
- tout.tv_usec = 10000;
- FD_ZERO(&ready);
- FD_ZERO(&writey);
- if (nibuf != 0) {
- if (ilevel >= max_level)
- top = &tout;
- else
- FD_SET(pty_master, &writey);
- } else if (stdin_readable)
- FD_SET(ifd, &ready);
- if (nobuf != 0) {
- if (olevel >= max_level)
- top = &tout;
- else
- FD_SET(ofd, &writey);
- } else if (pty_readable)
- FD_SET(pty_master, &ready);
- if (select(nfds, &ready, &writey, NULL, top) < 0) {
- if (errno != EINTR)
- fatal("select");
- continue;
- }
- if (max_data_rate) {
- double dt;
- int nbt;
- struct timeval now;
-
- gettimeofday(&now, NULL);
- dt = (now.tv_sec - levelt.tv_sec
- + (now.tv_usec - levelt.tv_usec) / 1e6);
- nbt = (int)(dt * max_data_rate);
- ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt;
- olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt;
- levelt = now;
- } else
- ilevel = olevel = 0;
- if (FD_ISSET(ifd, &ready)) {
- ibufp = inpacket_buf;
- nibuf = read(ifd, ibufp, sizeof(inpacket_buf));
- if (nibuf < 0 && errno == EIO)
- nibuf = 0;
- if (nibuf < 0) {
- if (!(errno == EINTR || errno == EAGAIN)) {
- error("Error reading standard input: %m");
- break;
- }
- nibuf = 0;
- } else if (nibuf == 0) {
- /* end of file from stdin */
- stdin_readable = 0;
- /* do a 0-length write, hopefully this will generate
- an EOF (hangup) on the slave side. */
- write(pty_master, inpacket_buf, 0);
- if (recordf)
- if (!record_write(recordf, 4, NULL, 0, &lasttime))
- recordf = NULL;
- } else {
- FD_SET(pty_master, &writey);
- if (recordf)
- if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
- recordf = NULL;
- }
- }
- if (FD_ISSET(pty_master, &ready)) {
- obufp = outpacket_buf;
- nobuf = read(pty_master, obufp, sizeof(outpacket_buf));
- if (nobuf < 0 && errno == EIO)
- nobuf = 0;
- if (nobuf < 0) {
- if (!(errno == EINTR || errno == EAGAIN)) {
- error("Error reading pseudo-tty master: %m");
- break;
- }
- nobuf = 0;
- } else if (nobuf == 0) {
- /* end of file from the pty - slave side has closed */
- pty_readable = 0;
- stdin_readable = 0; /* pty is not writable now */
- nibuf = 0;
- close(ofd);
- if (recordf)
- if (!record_write(recordf, 3, NULL, 0, &lasttime))
- recordf = NULL;
- } else {
- FD_SET(ofd, &writey);
- if (recordf)
- if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
- recordf = NULL;
- }
- }
- if (FD_ISSET(ofd, &writey)) {
- n = nobuf;
- if (olevel + n > max_level)
- n = max_level - olevel;
- n = write(ofd, obufp, n);
- if (n < 0) {
- if (errno == EIO) {
- pty_readable = 0;
- nobuf = 0;
- } else if (errno != EAGAIN && errno != EINTR) {
- error("Error writing standard output: %m");
- break;
- }
- } else {
- obufp += n;
- nobuf -= n;
- olevel += n;
- }
- }
- if (FD_ISSET(pty_master, &writey)) {
- n = nibuf;
- if (ilevel + n > max_level)
- n = max_level - ilevel;
- n = write(pty_master, ibufp, n);
- if (n < 0) {
- if (errno == EIO) {
- stdin_readable = 0;
- nibuf = 0;
- } else if (errno != EAGAIN && errno != EINTR) {
- error("Error writing pseudo-tty master: %m");
- break;
- }
- } else {
- ibufp += n;
- nibuf -= n;
- ilevel += n;
- }
- }
- }
- exit(0);
-}
-
-static int
-record_write(f, code, buf, nb, tp)
- FILE *f;
- int code;
- u_char *buf;
- int nb;
- struct timeval *tp;
-{
- struct timeval now;
- int diff;
-
- gettimeofday(&now, NULL);
- now.tv_usec /= 100000; /* actually 1/10 s, not usec now */
- diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
- if (diff > 0) {
- if (diff > 255) {
- putc(5, f);
- putc(diff >> 24, f);
- putc(diff >> 16, f);
- putc(diff >> 8, f);
- putc(diff, f);
- } else {
- putc(6, f);
- putc(diff, f);
- }
- *tp = now;
- }
- putc(code, f);
- if (buf != NULL) {
- putc(nb >> 8, f);
- putc(nb, f);
- fwrite(buf, nb, 1, f);
- }
- fflush(f);
- if (ferror(f)) {
- error("Error writing record file: %m");
- return 0;
- }
- return 1;
-}
+#endif /* USE_TDB */
projects / ppp.git / blobdiff