add stuff for packet filtering

[ppp.git] / pppd / Makefile.linux

diff --git a/pppd/Makefile.linux b/pppd/Makefile.linux
index 507f89c6d7efde95795152077ac421cb62a70eea..a7ff34f7349544af56de3bf09dcba168a1c3c816 100644 (file)
--- a/pppd/Makefile.linux
+++ b/pppd/Makefile.linux
@@ -1,18 +1,21 @@
 #
 # pppd makefile for Linux
-# $Id: Makefile.linux,v 1.8 1995/06/30 01:47:13 paulus Exp $
+# $Id: Makefile.linux,v 1.39 2000/08/01 01:38:29 paulus Exp $
 #
 
-BINDIR = /usr/lib/ppp
+# Default installation locations
+BINDIR = /usr/sbin
 MANDIR = /usr/man
 
 PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-       auth.c options.c sys-linux.c
-HEADERS = callout.h pathnames.h patchlevel.h chap.h md5.h
+          ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
+          demand.c utils.c multilink.c tdb.c tty.c
+HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
+          ipxcp.h cbcp.h tdb.h
 MANPAGES = pppd.8
-
 PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-       auth.o options.o sys-linux.o
+          auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
+          tdb.o tty.o
 
 all: pppd
 
@@ -20,32 +23,104 @@ all: pppd
 # include dependancies if present and backup if as a header file
 ifeq (.depend,$(wildcard .depend))
 include .depend
-HEADERS := $(HEADERS) .depend
 endif
 
 # CC = gcc
-# DEBUG_FLAGS = -DDEBUGALL
-COMPILE_FLAGS = -D_linux_=1 -DHAVE_PATHS_H
-COPTS = -g # -O2
-VER = 0.2.8
-LIBS = -lbsd
+#
+COPTS = -O2 -pipe -Wall -g
+LIBS =
 
-CFLAGS = $(COPTS) $(DEBUG_FLAGS) $(COMPILE_FLAGS)
-SOURCE= RELNOTES Makefile.linux $(PPPDSRCS) $(HEADERS) $(MANPAGES)
+ifneq ($(wildcard /usr/lib/libcrypt.*),)
+LIBS += -lcrypt
+endif
 
-install: pppd
-       mkdir -p $(BINDIR)
-       install -c -m 4555 -o root pppd $(BINDIR)/pppd
-       install -c -m 555 -o root pppd.8 $(MANDIR)/man8
+# Uncomment the next 2 lines to include support for Microsoft's
+# MS-CHAP authentication protocol.
+CHAPMS=y
+USE_CRYPT=y
+ifneq ($(wildcard /usr/lib/libcrypt.*),)
+HAVE_CRYPT_H=y
+endif
 
-pppd: $(PPPDOBJS)
-       $(CC) $(CFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
+# Uncomment the next line to include support for PPP packet filtering.
+# This requires that the libpcap library and headers be installed.
+FILTER=y
+
+HAS_SHADOW=y
+#USE_PAM=y
+#HAVE_INET6=y
+
+PLUGIN=y
+
+INCLUDE_DIRS= -I../include
+
+COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
+
+CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
+
+ifdef CHAPMS
+CFLAGS   += -DCHAPMS=1
+ifndef USE_CRYPT
+LIBS     := -ldes $(LIBS)
+else
+CFLAGS   += -DUSE_CRYPT=1
+ifneq ($(wildcard /usr/include/crypt.h),)
+CFLAGS   += -DHAVE_CRYPT_H=1
+endif
+endif
+PPPDOBJS += md4.o chap_ms.o
+ifdef MSLANMAN
+CFLAGS   += -DMSLANMAN=1
+endif
+endif
+
+ifdef HAS_SHADOW
+CFLAGS   += -DHAS_SHADOW
+#LIBS     := -lshadow $(LIBS)
+endif
+
+# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
+ifdef USE_PAM
+CFLAGS   += -DUSE_PAM
+LIBS     := -lpam -ldl $(LIBS)
+endif
+
+# Lock library binary for Linux is included in 'linux' subdirectory.
+ifdef LOCKLIB
+LIBS     := -llock $(LIBS)
+CFLAGS   += -DLOCKLIB=1
+endif
+
+ifdef PLUGIN
+CFLAGS += -DPLUGIN
+LDFLAGS        += -Wl,-E
+LIBS   += -ldl
+endif
+
+ifdef FILTER
+LIBS    += -lpcap
+CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
+endif
+
+ifdef HAVE_INET6
+     PPPDSRCS += ipv6cp.c eui64.c
+     HEADERS  += ipv6cp.h eui64.h
+     PPPDOBJS += ipv6cp.o eui64.o
+     CFLAGS   += -DINET6=1
+endif
 
-pppd.tar: $(SOURCE)
-       tar -cvf pppd.tar $(SOURCE)
 
-pppd.tar.gz: pppd.tar
-       gzip pppd.tar
+INSTALL= install -o root
+
+install: pppd
+       mkdir -p $(BINDIR) $(MANDIR)
+       $(INSTALL) -s -c -m 4550 pppd $(BINDIR)/pppd
+       if ! chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \
+         chmod o+rx $(BINDIR)/pppd; fi
+       $(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
+
+pppd: $(PPPDOBJS)
+       $(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
 
 clean:
        rm -f $(PPPDOBJS) pppd *~ #* core