* OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
* OR MODIFICATIONS.
*
- * $Id: ppp.c,v 1.15 1998/05/04 06:11:35 paulus Exp $
+ * $Id: ppp.c,v 1.25 1999/10/08 01:10:12 masputra Exp $
*/
/*
#include <sys/dlpi.h>
#include <sys/ddi.h>
#ifdef SOL2
+#include <sys/ksynch.h>
#include <sys/kstat.h>
#include <sys/sunddi.h>
+#include <sys/ethernet.h>
#else
#include <sys/socket.h>
#include <sys/sockio.h>
* interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
*/
#ifdef PRIOQ
-#include <netinet/in.h>
#endif /* PRIOQ */
+#include <netinet/in.h> /* leave this outside of PRIOQ for htons */
+
#ifdef __STDC__
#define __P(x) x
#else
#define ETHERTYPE_IP 0x800
#endif
+#if !defined(ETHERTYPE_IPV6)
+#define ETHERTYPE_IPV6 0x86dd
+#endif /* !defined(ETHERTYPE_IPV6) */
+
+#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
+#define ETHERTYPE_ALLSAP 0
+#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
+
+#if !defined(PPP_ALLSAP) && defined(SOL2)
+#define PPP_ALLSAP PPP_ALLSTATIONS
+#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
+
extern time_t time;
+#ifdef SOL2
+/*
+ * We use this reader-writer lock to ensure that the lower streams
+ * stay connected to the upper streams while the lower-side put and
+ * service procedures are running. Essentially it is an existence
+ * lock for the upper stream associated with each lower stream.
+ */
+krwlock_t ppp_lower_lock;
+#define LOCK_LOWER_W rw_enter(&ppp_lower_lock, RW_WRITER)
+#define LOCK_LOWER_R rw_enter(&ppp_lower_lock, RW_READER)
+#define TRYLOCK_LOWER_R rw_tryenter(&ppp_lower_lock, RW_READER)
+#define UNLOCK_LOWER rw_exit(&ppp_lower_lock)
+
+#define MT_ENTER(x) mutex_enter(x)
+#define MT_EXIT(x) mutex_exit(x)
+
+/*
+ * Notes on multithreaded implementation for Solaris 2:
+ *
+ * We use an inner perimeter around each queue pair and an outer
+ * perimeter around the whole driver. The inner perimeter is
+ * entered exclusively for all entry points (open, close, put,
+ * service). The outer perimeter is entered exclusively for open
+ * and close and shared for put and service. This is all done for
+ * us by the streams framework.
+ *
+ * I used to think that the perimeters were entered for the lower
+ * streams' put and service routines as well as for the upper streams'.
+ * Because of problems experienced by people, and after reading the
+ * documentation more closely, I now don't think that is true. So we
+ * now use ppp_lower_lock to give us an existence guarantee on the
+ * upper stream controlling each lower stream.
+ *
+ * Shared entry to the outer perimeter protects the existence of all
+ * the upper streams and their upperstr_t structures, and guarantees
+ * that the following fields of any upperstr_t won't change:
+ * nextmn, next, nextppa. It guarantees that the lowerq field of an
+ * upperstr_t won't go from non-zero to zero, that the global `ppas'
+ * won't change and that the no lower stream will get unlinked.
+ *
+ * Shared (reader) access to ppa_lower_lock guarantees that no lower
+ * stream will be unlinked and that the lowerq field of all upperstr_t
+ * structures won't change.
+ */
+
+#else /* SOL2 */
+#define LOCK_LOWER_W 0
+#define LOCK_LOWER_R 0
+#define TRYLOCK_LOWER_R 1
+#define UNLOCK_LOWER 0
+#define MT_ENTER(x) 0
+#define MT_EXIT(x) 0
+
+#endif /* SOL2 */
+
/*
* Private information; one per upper stream.
*/
struct upperstr *next; /* next stream for this ppa */
uint ioc_id; /* last ioctl ID for this stream */
enum NPmode npmode; /* what to do with packets on this SAP */
+ unsigned char rblocked; /* flow control has blocked upper read strm */
+ /* N.B. rblocked is only changed by control stream's put/srv procs */
/*
* There is exactly one control stream for each PPA.
* The following fields are only used for control streams.
time_t last_sent; /* time last NP packet sent */
time_t last_recv; /* time last NP packet rcvd */
#ifdef SOL2
+ kmutex_t stats_lock; /* lock for stats updates */
kstat_t *kstats; /* stats for netstat */
#endif /* SOL2 */
#ifdef LACHTCP
#define US_BLOCKED 4 /* flow ctrl has blocked lower write stream */
#define US_LASTMOD 8 /* no PPP modules below us */
#define US_DBGLOG 0x10 /* log various occurrences */
+#define US_RBLOCKED 0x20 /* flow ctrl has blocked upper read stream */
+#if defined(SOL2)
+#if DL_CURRENT_VERSION >= 2
+#define US_PROMISC 0x40 /* stream is promiscuous */
+#endif /* DL_CURRENT_VERSION >= 2 */
+#define US_RAWDATA 0x80 /* raw M_DATA, no DLPI header */
+#endif /* defined(SOL2) */
#ifdef PRIOQ
static u_char max_band=0;
static int pppopen __P((queue_t *, int, int, int));
static int pppclose __P((queue_t *, int));
#endif /* SVR4 */
+static int pppurput __P((queue_t *, mblk_t *));
static int pppuwput __P((queue_t *, mblk_t *));
static int pppursrv __P((queue_t *));
static int pppuwsrv __P((queue_t *));
static void new_ppa __P((queue_t *, mblk_t *));
static void attach_ppa __P((queue_t *, mblk_t *));
static void detach_ppa __P((queue_t *, mblk_t *));
+static void detach_lower __P((queue_t *, mblk_t *));
static void debug_dump __P((queue_t *, mblk_t *));
static upperstr_t *find_dest __P((upperstr_t *, int));
+#if defined(SOL2)
+static upperstr_t *find_promisc __P((upperstr_t *, int));
+static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
+static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
+static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
+#endif /* defined(SOL2) */
static int putctl2 __P((queue_t *, int, int, int));
static int putctl4 __P((queue_t *, int, int, int));
static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
+#ifdef FILTER_PACKETS
static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
+#endif /* FILTER_PACKETS */
#define PPP_ID 0xb1a6
static struct module_info ppp_info = {
};
static struct qinit pppurint = {
- NULL, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
+ pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
};
static struct qinit pppuwint = {
q->q_ptr = (caddr_t) up;
WR(q)->q_ptr = (caddr_t) up;
noenable(WR(q));
+#ifdef SOL2
+ mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
+#endif
++ppp_count;
qprocson(q);
#ifdef LACHTCP
struct ifstats *ifp, *pifp;
#endif
+ if (up->lowerq != 0) {
+ /* Gack! the lower stream should have be unlinked earlier! */
+ DPRINT1("ppp%d: lower stream still connected on close?\n",
+ up->mn);
+ LOCK_LOWER_W;
+ up->lowerq->q_ptr = 0;
+ RD(up->lowerq)->q_ptr = 0;
+ up->lowerq = 0;
+ UNLOCK_LOWER;
+ }
+
/*
* This stream represents a PPA:
* For all streams attached to the PPA, clear their
#ifdef SOL2
if (up->kstats)
kstat_delete(up->kstats);
+ mutex_destroy(&up->stats_lock);
#endif
q->q_ptr = NULL;
queue_t *q;
mblk_t *mp;
{
- upperstr_t *us, *usnext, *ppa, *os, *nps;
+ upperstr_t *us, *ppa, *nps;
struct iocblk *iop;
struct linkblk *lb;
#ifdef LACHTCP
int error, n, sap;
mblk_t *mq;
struct ppp_idle *pip;
- int len;
#ifdef PRIOQ
queue_t *tlq;
#endif /* PRIOQ */
+#ifdef NO_DLPI
+ upperstr_t *os;
+#endif
us = (upperstr_t *) q->q_ptr;
if (us == 0) {
DPRINT3("ppp/%d: ioctl %x count=%d\n",
us->mn, iop->ioc_cmd, iop->ioc_count);
switch (iop->ioc_cmd) {
+#if defined(SOL2)
+ case DLIOCRAW: /* raw M_DATA mode */
+ us->flags |= US_RAWDATA;
+ error = 0;
+ break;
+#endif /* defined(SOL2) */
case I_LINK:
if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
break;
break;
}
lb = (struct linkblk *) mp->b_cont->b_rptr;
- us->lowerq = lq = lb->l_qbot;
+ lq = lb->l_qbot;
if (lq == 0) {
DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
break;
}
- lq->q_ptr = (caddr_t) us;
- RD(lq)->q_ptr = (caddr_t) us;
- noenable(RD(lq));
- flushq(RD(lq), FLUSHALL);
+ LOCK_LOWER_W;
+ us->lowerq = lq;
+ lq->q_ptr = (caddr_t) q;
+ RD(lq)->q_ptr = (caddr_t) us->q;
+ UNLOCK_LOWER;
iop->ioc_count = 0;
error = 0;
us->flags &= ~US_LASTMOD;
/* Unblock upper streams which now feed this lower stream. */
- qenable(lq);
+ qenable(q);
/* Send useful information down to the modules which
are now linked below us. */
putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
break;
}
#endif
- us->lowerq = 0;
iop->ioc_count = 0;
- error = 0;
- /* Unblock streams which now feed back up the control stream. */
- qenable(us->q);
+ qwriter(q, mp, detach_lower, PERIM_OUTER);
+ error = -1;
break;
case PPPIO_NEWPPA:
if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
qwriter(q, NULL, debug_dump, PERIM_OUTER);
iop->ioc_count = 0;
- error = 0;
+ error = -1;
} else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
DPRINT1("ppp/%d: debug log enabled\n", us->mn);
us->flags |= US_DBGLOG;
break;
}
sap = ((int *)mp->b_cont->b_rptr)[0];
- for (nps = us->next; nps != 0; nps = nps->next)
+ for (nps = us->next; nps != 0; nps = nps->next) {
+ if (us->flags & US_DBGLOG)
+ DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
if (nps->sap == sap)
break;
+ }
if (nps == 0) {
if (us->flags & US_DBGLOG)
DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
break;
}
+ /* XXX possibly should use qwriter here */
nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
- if (nps->npmode == NPMODE_DROP || nps->npmode == NPMODE_ERROR)
- flushq(WR(nps->q), FLUSHDATA);
- else if (nps->npmode == NPMODE_PASS && qsize(WR(nps->q)) > 0
- && (nps->flags & US_BLOCKED) == 0)
+ if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
qenable(WR(nps->q));
iop->ioc_count = 0;
error = 0;
int size = mp->b_wptr - mp->b_rptr;
mblk_t *reply, *np;
upperstr_t *ppa, *os;
- int sap, *ip, len;
+ int sap, len;
dl_info_ack_t *info;
dl_bind_ack_t *ackp;
+#if DL_CURRENT_VERSION >= 2
+ dl_phys_addr_ack_t *paddrack;
+ static struct ether_addr eaddr = {0};
+#endif
if (us->flags & US_DBGLOG)
DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
info->dl_min_sdu = 1;
info->dl_addr_length = sizeof(uint);
-#ifdef DL_OTHER
- info->dl_mac_type = DL_OTHER;
-#else
- info->dl_mac_type = DL_HDLC; /* a lie */
-#endif
+ info->dl_mac_type = DL_ETHER; /* a bigger lie */
info->dl_current_state = us->state;
info->dl_service_mode = DL_CLDLS;
info->dl_provider_style = DL_STYLE2;
}
us->ppa = ppa;
qwriter(q, mp, attach_ppa, PERIM_OUTER);
- break;
+ return;
case DL_DETACH_REQ:
if (size < sizeof(dl_detach_req_t))
break;
}
qwriter(q, mp, detach_ppa, PERIM_OUTER);
- break;
+ return;
case DL_BIND_REQ:
if (size < sizeof(dl_bind_req_t))
except that we accept ETHERTYPE_IP in place of PPP_IP. */
sap = d->bind_req.dl_sap;
us->req_sap = sap;
+
+#if defined(SOL2)
+ if (us->flags & US_DBGLOG)
+ DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
+
+ if (sap == ETHERTYPE_IP) /* normal IFF_IPV4 */
+ sap = PPP_IP;
+ else if (sap == ETHERTYPE_IPV6) /* when IFF_IPV6 is set */
+ sap = PPP_IPV6;
+ else if (sap == ETHERTYPE_ALLSAP) /* snoop gives sap of 0 */
+ sap = PPP_ALLSAP;
+ else {
+ DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
+ dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
+ break;
+ }
+#else
if (sap == ETHERTYPE_IP)
sap = PPP_IP;
if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
break;
}
+#endif /* defined(SOL2) */
/* check that no other stream is bound to this sap already. */
for (os = us->ppa; os != 0; os = os->next)
DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
break;
}
+
+#if defined(SOL2)
+ /*
+ * Should there be any promiscuous stream(s), send the data
+ * up for each promiscuous stream that we recognize.
+ */
+ if (mp->b_cont)
+ promisc_sendup(ppa, mp->b_cont, us->sap, 0);
+#endif /* defined(SOL2) */
+
mp->b_band = 0;
#ifdef PRIOQ
/* Extract s_port & d_port from IP-packet, the code is a bit
return;
#if DL_CURRENT_VERSION >= 2
+ case DL_PHYS_ADDR_REQ:
+ if (size < sizeof(dl_phys_addr_req_t))
+ goto badprim;
+
+ /*
+ * Don't check state because ifconfig sends this one down too
+ */
+
+ if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL,
+ BPRI_HI)) == 0)
+ break; /* should do bufcall */
+ reply->b_datap->db_type = M_PCPROTO;
+ paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
+ reply->b_wptr += sizeof(dl_phys_addr_ack_t);
+ bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
+ paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
+ paddrack->dl_addr_length = ETHERADDRL;
+ paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
+ bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
+ reply->b_wptr += ETHERADDRL;
+ qreply(q, reply);
+ break;
+
+#if defined(SOL2)
+ case DL_PROMISCON_REQ:
+ if (size < sizeof(dl_promiscon_req_t))
+ goto badprim;
+ us->flags |= US_PROMISC;
+ dlpi_ok(q, DL_PROMISCON_REQ);
+ break;
+
+ case DL_PROMISCOFF_REQ:
+ if (size < sizeof(dl_promiscoff_req_t))
+ goto badprim;
+ us->flags &= ~US_PROMISC;
+ dlpi_ok(q, DL_PROMISCOFF_REQ);
+ break;
+#else
+ case DL_PROMISCON_REQ: /* fall thru */
+ case DL_PROMISCOFF_REQ: /* fall thru */
+#endif /* defined(SOL2) */
+#endif /* DL_CURRENT_VERSION >= 2 */
+
+#if DL_CURRENT_VERSION >= 2
+ case DL_SET_PHYS_ADDR_REQ:
case DL_SUBS_BIND_REQ:
case DL_SUBS_UNBIND_REQ:
case DL_ENABMULTI_REQ:
case DL_DISABMULTI_REQ:
- case DL_PROMISCON_REQ:
- case DL_PROMISCOFF_REQ:
- case DL_PHYS_ADDR_REQ:
- case DL_SET_PHYS_ADDR_REQ:
case DL_XID_REQ:
case DL_TEST_REQ:
case DL_REPLY_UPDATE_REQ:
return pass;
}
+/*
+ * We have some data to send down to the lower stream (or up the
+ * control stream, if we don't have a lower stream attached).
+ * Returns 1 if the message was dealt with, 0 if it wasn't able
+ * to be sent on and should therefore be queued up.
+ */
static int
send_data(mp, us)
mblk_t *mp;
upperstr_t *us;
{
- queue_t *q;
upperstr_t *ppa;
if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
freemsg(mp);
return 1;
}
- if ((q = ppa->lowerq) == 0) {
+ if (ppa->lowerq == 0) {
/* try to send it up the control stream */
if (bcanputnext(ppa->q, mp->b_band)) {
/*
}
} else {
if (bcanputnext(ppa->lowerq, mp->b_band)) {
+ MT_ENTER(&ppa->stats_lock);
+ ppa->stats.ppp_opackets++;
+ ppa->stats.ppp_obytes += msgdsize(mp);
+#ifdef INCR_OPACKETS
+ INCR_OPACKETS(ppa);
+#endif
+ MT_EXIT(&ppa->stats_lock);
/*
- * The lower write queue's put procedure just updates counters
- * and does a putnext. We call it so that on SMP systems, we
- * enter the lower queues' perimeter so that the counter
- * updates are serialized.
+ * The lower queue is only ever detached while holding an
+ * exclusive lock on the whole driver. So we can be confident
+ * that the lower queue is still there.
*/
- put(ppa->lowerq, mp);
+ putnext(ppa->lowerq, mp);
return 1;
}
}
queue_t *q;
mblk_t *mp;
{
- upperstr_t *us, **usp;
+ upperstr_t *us, *up, **usp;
int ppa_id;
+ us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("new_ppa: q_ptr = 0!\n");
+ return;
+ }
+
usp = &ppas;
ppa_id = 0;
- while ((us = *usp) != 0 && ppa_id == us->ppa_id) {
+ while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
++ppa_id;
- usp = &us->nextppa;
+ usp = &up->nextppa;
}
- us = (upperstr_t *) q->q_ptr;
us->ppa_id = ppa_id;
us->ppa = us;
us->next = 0;
upperstr_t *us, *t;
us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("attach_ppa: q_ptr = 0!\n");
+ return;
+ }
+
#ifndef NO_DLPI
us->state = DL_UNBOUND;
#endif
upperstr_t *us, *t;
us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("detach_ppa: q_ptr = 0!\n");
+ return;
+ }
+
for (t = us->ppa; t->next != 0; t = t->next)
if (t->next == us) {
t->next = us->next;
#endif
}
+/*
+ * We call this with qwriter in order to give the upper queue procedures
+ * the guarantee that the lower queue is not going to go away while
+ * they are executing.
+ */
+static void
+detach_lower(q, mp)
+ queue_t *q;
+ mblk_t *mp;
+{
+ upperstr_t *us;
+
+ us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("detach_lower: q_ptr = 0!\n");
+ return;
+ }
+
+ LOCK_LOWER_W;
+ us->lowerq->q_ptr = 0;
+ RD(us->lowerq)->q_ptr = 0;
+ us->lowerq = 0;
+ UNLOCK_LOWER;
+
+ /* Unblock streams which now feed back up the control stream. */
+ qenable(us->q);
+
+ mp->b_datap->db_type = M_IOCACK;
+ qreply(q, mp);
+}
+
static int
pppuwsrv(q)
queue_t *q;
{
- upperstr_t *us;
- struct lowerstr *ls;
- queue_t *lwq;
+ upperstr_t *us, *as;
mblk_t *mp;
us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("pppuwsrv: q_ptr = 0!\n");
+ return 0;
+ }
+
+ /*
+ * If this is a control stream, then this service procedure
+ * probably got enabled because of flow control in the lower
+ * stream being enabled (or because of the lower stream going
+ * away). Therefore we enable the service procedure of all
+ * attached upper streams.
+ */
+ if (us->flags & US_CONTROL) {
+ for (as = us->next; as != 0; as = as->next)
+ qenable(WR(as->q));
+ }
+
+ /* Try to send on any data queued here. */
us->flags &= ~US_BLOCKED;
while ((mp = getq(q)) != 0) {
if (!send_data(mp, us)) {
break;
}
}
+
return 0;
}
+/* should never get called... */
static int
ppplwput(q, mp)
queue_t *q;
mblk_t *mp;
{
- upperstr_t *ppa;
-
- ppa = (upperstr_t *) q->q_ptr;
- if (ppa != 0) { /* why wouldn't it? */
- ppa->stats.ppp_opackets++;
- ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
- INCR_OPACKETS(ppa);
-#endif
- }
putnext(q, mp);
return 0;
}
ppplwsrv(q)
queue_t *q;
{
- upperstr_t *us;
+ queue_t *uq;
/*
* Flow control has back-enabled this stream:
- * enable the write service procedures of all upper
- * streams feeding this lower stream.
+ * enable the upper write service procedure for
+ * the upper control stream for this lower stream.
*/
- for (us = (upperstr_t *) q->q_ptr; us != NULL; us = us->next)
- if (us->flags & US_BLOCKED)
- qenable(WR(us->q));
+ LOCK_LOWER_R;
+ uq = (queue_t *) q->q_ptr;
+ if (uq != 0)
+ qenable(uq);
+ UNLOCK_LOWER;
+ return 0;
+}
+
+/*
+ * This should only get called for control streams.
+ */
+static int
+pppurput(q, mp)
+ queue_t *q;
+ mblk_t *mp;
+{
+ upperstr_t *ppa, *us;
+ int proto, len;
+ struct iocblk *iop;
+
+ ppa = (upperstr_t *) q->q_ptr;
+ if (ppa == 0) {
+ DPRINT("pppurput: q_ptr = 0!\n");
+ return 0;
+ }
+
+ switch (mp->b_datap->db_type) {
+ case M_CTL:
+ MT_ENTER(&ppa->stats_lock);
+ switch (*mp->b_rptr) {
+ case PPPCTL_IERROR:
+#ifdef INCR_IERRORS
+ INCR_IERRORS(ppa);
+#endif
+ ppa->stats.ppp_ierrors++;
+ break;
+ case PPPCTL_OERROR:
+#ifdef INCR_OERRORS
+ INCR_OERRORS(ppa);
+#endif
+ ppa->stats.ppp_oerrors++;
+ break;
+ }
+ MT_EXIT(&ppa->stats_lock);
+ freemsg(mp);
+ break;
+
+ case M_IOCACK:
+ case M_IOCNAK:
+ /*
+ * Attempt to match up the response with the stream
+ * that the request came from.
+ */
+ iop = (struct iocblk *) mp->b_rptr;
+ for (us = ppa; us != 0; us = us->next)
+ if (us->ioc_id == iop->ioc_id)
+ break;
+ if (us == 0)
+ freemsg(mp);
+ else
+ putnext(us->q, mp);
+ break;
+
+ case M_HANGUP:
+ /*
+ * The serial device has hung up. We don't want to send
+ * the M_HANGUP message up to pppd because that will stop
+ * us from using the control stream any more. Instead we
+ * send a zero-length message as an end-of-file indication.
+ */
+ freemsg(mp);
+ mp = allocb(1, BPRI_HI);
+ if (mp == 0) {
+ DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
+ break;
+ }
+ putnext(ppa->q, mp);
+ break;
+
+ default:
+ if (mp->b_datap->db_type == M_DATA) {
+ len = msgdsize(mp);
+ if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
+ PULLUP(mp, PPP_HDRLEN);
+ if (mp == 0) {
+ DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
+ break;
+ }
+ }
+ MT_ENTER(&ppa->stats_lock);
+ ppa->stats.ppp_ipackets++;
+ ppa->stats.ppp_ibytes += len;
+#ifdef INCR_IPACKETS
+ INCR_IPACKETS(ppa);
+#endif
+ MT_EXIT(&ppa->stats_lock);
+
+ proto = PPP_PROTOCOL(mp->b_rptr);
+
+#if defined(SOL2)
+ /*
+ * Should there be any promiscuous stream(s), send the data
+ * up for each promiscuous stream that we recognize.
+ */
+ promisc_sendup(ppa, mp, proto, 1);
+#endif /* defined(SOL2) */
+
+ if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
+ /*
+ * A data packet for some network protocol.
+ * Queue it on the upper stream for that protocol.
+ * XXX could we just putnext it? (would require thought)
+ * The rblocked flag is there to ensure that we keep
+ * messages in order for each network protocol.
+ */
+ if (!pass_packet(us, mp, 0))
+ break;
+ if (!us->rblocked && !canput(us->q))
+ us->rblocked = 1;
+ if (!us->rblocked)
+ putq(us->q, mp);
+ else
+ putq(q, mp);
+ break;
+ }
+ }
+ /*
+ * A control frame, a frame for an unknown protocol,
+ * or some other message type.
+ * Send it up to pppd via the control stream.
+ */
+ if (queclass(mp) == QPCTL || canputnext(ppa->q))
+ putnext(ppa->q, mp);
+ else
+ putq(q, mp);
+ break;
+ }
+
return 0;
}
int proto;
us = (upperstr_t *) q->q_ptr;
+ if (us == 0) {
+ DPRINT("pppursrv: q_ptr = 0!\n");
+ return 0;
+ }
+
if (us->flags & US_CONTROL) {
/*
* A control stream.
as = as->next;
} while (as != 0);
}
+
+ /*
+ * Messages get queued on this stream's read queue if they
+ * can't be queued on the read queue of the attached stream
+ * that they are destined for. This is for flow control -
+ * when this queue fills up, the lower read put procedure will
+ * queue messages there and the flow control will propagate
+ * down from there.
+ */
+ while ((mp = getq(q)) != 0) {
+ proto = PPP_PROTOCOL(mp->b_rptr);
+ if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
+ if (!canput(as->q))
+ break;
+ putq(as->q, mp);
+ } else {
+ if (!canputnext(q))
+ break;
+ putnext(q, mp);
+ }
+ }
+ if (mp) {
+ putbq(q, mp);
+ } else {
+ /* can now put stuff directly on network protocol streams again */
+ for (as = us->next; as != 0; as = as->next)
+ as->rblocked = 0;
+ }
+
+ /*
+ * If this stream has a lower stream attached,
+ * enable the read queue's service routine.
+ * XXX we should really only do this if the queue length
+ * has dropped below the low-water mark.
+ */
+ if (us->lowerq != 0)
+ qenable(RD(us->lowerq));
+
} else {
/*
* A network protocol stream. Put a DLPI header on each
putnext(q, mp);
#endif /* NO_DLPI */
}
+ /*
+ * Now that we have consumed some packets from this queue,
+ * enable the control stream's read service routine so that we
+ * can process any packets for us that might have got queued
+ * there for flow control reasons.
+ */
+ if (us->ppa)
+ qenable(us->ppa->q);
}
- /*
- * If this stream is attached to a PPA with a lower queue pair,
- * enable the read queue's service routine if it has data queued.
- * XXX there is a possibility that packets could get out of order
- * if ppplrput now runs before ppplrsrv.
- */
- if (us->ppa != 0 && us->ppa->lowerq != 0)
- qenable(RD(us->ppa->lowerq));
-
return 0;
}
return us;
}
+#if defined (SOL2)
+/*
+ * Test upstream promiscuous conditions. As of now, only pass IPv4 and
+ * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
+ */
+static upperstr_t *
+find_promisc(us, proto)
+ upperstr_t *us;
+ int proto;
+{
+
+ if ((proto != PPP_IP) && (proto != PPP_IPV6))
+ return (upperstr_t *)0;
+
+ for ( ; us; us = us->next) {
+ if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
+ return us;
+ }
+
+ return (upperstr_t *)0;
+}
+
+/*
+ * Prepend an empty Ethernet header to msg for snoop, et al.
+ */
+static mblk_t *
+prepend_ether(us, mp, proto)
+ upperstr_t *us;
+ mblk_t *mp;
+ int proto;
+{
+ mblk_t *eh;
+ int type;
+
+ if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
+ freemsg(mp);
+ return (mblk_t *)0;
+ }
+
+ if (proto == PPP_IP)
+ type = ETHERTYPE_IP;
+ else if (proto == PPP_IPV6)
+ type = ETHERTYPE_IPV6;
+ else
+ type = proto; /* What else? Let decoder decide */
+
+ eh->b_wptr += sizeof(struct ether_header);
+ bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
+ ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
+ eh->b_cont = mp;
+ return (eh);
+}
+
+/*
+ * Prepend DL_UNITDATA_IND mblk to msg
+ */
+static mblk_t *
+prepend_udind(us, mp, proto)
+ upperstr_t *us;
+ mblk_t *mp;
+ int proto;
+{
+ dl_unitdata_ind_t *dlu;
+ mblk_t *dh;
+ size_t size;
+
+ size = sizeof(dl_unitdata_ind_t);
+ if ((dh = allocb(size, BPRI_MED)) == 0) {
+ freemsg(mp);
+ return (mblk_t *)0;
+ }
+
+ dh->b_datap->db_type = M_PROTO;
+ dh->b_wptr = dh->b_datap->db_lim;
+ dh->b_rptr = dh->b_wptr - size;
+
+ dlu = (dl_unitdata_ind_t *)dh->b_rptr;
+ dlu->dl_primitive = DL_UNITDATA_IND;
+ dlu->dl_dest_addr_length = 0;
+ dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
+ dlu->dl_src_addr_length = 0;
+ dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
+ dlu->dl_group_address = 0;
+
+ dh->b_cont = mp;
+ return (dh);
+}
+
+/*
+ * For any recognized promiscuous streams, send data upstream
+ */
+static void
+promisc_sendup(ppa, mp, proto, skip)
+ upperstr_t *ppa;
+ mblk_t *mp;
+ int proto, skip;
+{
+ mblk_t *dup_mp, *dup_dup_mp;
+ upperstr_t *prus, *nprus;
+
+ if ((prus = find_promisc(ppa, proto)) != 0) {
+ if (dup_mp = dupmsg(mp)) {
+
+ if (skip)
+ dup_mp->b_rptr += PPP_HDRLEN;
+
+ for ( ; nprus = find_promisc(prus->next, proto);
+ prus = nprus) {
+
+ if (dup_dup_mp = dupmsg(dup_mp)) {
+ if (canputnext(prus->q)) {
+ if (prus->flags & US_RAWDATA) {
+ dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
+ putnext(prus->q, dup_dup_mp);
+ } else {
+ dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
+ putnext(prus->q, dup_dup_mp);
+ }
+ } else {
+ DPRINT("ppp_urput: data to promisc q dropped\n");
+ freemsg(dup_dup_mp);
+ }
+ }
+ }
+
+ if (canputnext(prus->q)) {
+ if (prus->flags & US_RAWDATA) {
+ dup_mp = prepend_ether(prus, dup_mp, proto);
+ putnext(prus->q, dup_mp);
+ } else {
+ dup_mp = prepend_udind(prus, dup_mp, proto);
+ putnext(prus->q, dup_mp);
+ }
+ } else {
+ DPRINT("ppp_urput: data to promisc q dropped\n");
+ freemsg(dup_mp);
+ }
+ }
+ }
+}
+#endif /* defined(SOL2) */
+
+/*
+ * We simply put the message on to the associated upper control stream
+ * (either here or in ppplrsrv). That way we enter the perimeters
+ * before looking through the list of attached streams to decide which
+ * stream it should go up.
+ */
static int
ppplrput(q, mp)
queue_t *q;
mblk_t *mp;
{
- upperstr_t *ppa, *us;
queue_t *uq;
- int proto, len;
- mblk_t *np;
struct iocblk *iop;
- ppa = (upperstr_t *) q->q_ptr;
- if (ppa == 0) {
- DPRINT1("ppplrput: q = %x, ppa = 0??\n", q);
- freemsg(mp);
- return 0;
- }
switch (mp->b_datap->db_type) {
+ case M_IOCTL:
+ iop = (struct iocblk *) mp->b_rptr;
+ iop->ioc_error = EINVAL;
+ mp->b_datap->db_type = M_IOCNAK;
+ qreply(q, mp);
+ return 0;
case M_FLUSH:
+ if (*mp->b_rptr & FLUSHR)
+ flushq(q, FLUSHDATA);
if (*mp->b_rptr & FLUSHW) {
*mp->b_rptr &= ~FLUSHR;
qreply(q, mp);
} else
freemsg(mp);
- break;
-
- case M_CTL:
- switch (*mp->b_rptr) {
- case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
- INCR_IERRORS(ppa);
-#endif
- ppa->stats.ppp_ierrors++;
- break;
- case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
- INCR_OERRORS(ppa);
-#endif
- ppa->stats.ppp_oerrors++;
- break;
- }
- freemsg(mp);
- break;
+ return 0;
+ }
- case M_IOCACK:
- case M_IOCNAK:
- /*
- * Attempt to match up the response with the stream
- * that the request came from.
- */
- iop = (struct iocblk *) mp->b_rptr;
- for (us = ppa; us != 0; us = us->next)
- if (us->ioc_id == iop->ioc_id)
- break;
- if (us == 0)
- freemsg(mp);
- else
- putnext(us->q, mp);
- break;
+ /*
+ * If we can't get the lower lock straight away, queue this one
+ * rather than blocking, to avoid the possibility of deadlock.
+ */
+ if (!TRYLOCK_LOWER_R) {
+ putq(q, mp);
+ return 0;
+ }
- case M_HANGUP:
- /*
- * The serial device has hung up. We don't want to send
- * the M_HANGUP message up to pppd because that will stop
- * us from using the control stream any more. Instead we
- * send a zero-length message as an end-of-file indication.
- */
+ /*
+ * Check that we're still connected to the driver.
+ */
+ uq = (queue_t *) q->q_ptr;
+ if (uq == 0) {
+ UNLOCK_LOWER;
+ DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
freemsg(mp);
- mp = allocb(1, BPRI_HI);
- if (mp == 0) {
- DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
- break;
- }
- putnext(ppa->q, mp);
- break;
-
- default:
- if (mp->b_datap->db_type == M_DATA) {
- len = msgdsize(mp);
- if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
- PULLUP(mp, PPP_HDRLEN);
- if (mp == 0) {
- DPRINT1("ppp_lrput: msgpullup failed (len=%d)\n", len);
- break;
- }
- }
- ppa->stats.ppp_ipackets++;
- ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
- INCR_IPACKETS(ppa);
-#endif
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
- /*
- * A data packet for some network protocol.
- * Queue it on the upper stream for that protocol.
- */
- if (!pass_packet(us, mp, 0))
- break;
- if (canput(us->q))
- putq(us->q, mp);
- else
- putq(q, mp);
- break;
- }
- }
- /*
- * A control frame, a frame for an unknown protocol,
- * or some other message type.
- * Send it up to pppd via the control stream.
- */
- if (queclass(mp) == QPCTL || canputnext(ppa->q))
- putnext(ppa->q, mp);
- else
- putq(q, mp);
- break;
+ return 0;
}
+ /*
+ * Try to forward the message to the put routine for the upper
+ * control stream for this lower stream.
+ * If there are already messages queued here, queue this one so
+ * they don't get out of order.
+ */
+ if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
+ put(uq, mp);
+ else
+ putq(q, mp);
+
+ UNLOCK_LOWER;
return 0;
}
queue_t *q;
{
mblk_t *mp;
- upperstr_t *ppa, *us;
- int proto;
+ queue_t *uq;
/*
- * Packets only get queued here for flow control reasons.
+ * Packets get queued here for flow control reasons
+ * or if the lrput routine couldn't get the lower lock
+ * without blocking.
*/
- ppa = (upperstr_t *) q->q_ptr;
+ LOCK_LOWER_R;
+ uq = (queue_t *) q->q_ptr;
+ if (uq == 0) {
+ UNLOCK_LOWER;
+ flushq(q, FLUSHALL);
+ DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
+ return 0;
+ }
while ((mp = getq(q)) != 0) {
- if (mp->b_datap->db_type == M_DATA
- && (proto = PPP_PROTOCOL(mp->b_rptr)) < 0x8000
- && (us = find_dest(ppa, proto)) != 0) {
- if (canput(us->q))
- putq(us->q, mp);
- else {
- putbq(q, mp);
- break;
- }
- } else {
- if (canputnext(ppa->q))
- putnext(ppa->q, mp);
- else {
- putbq(q, mp);
- break;
- }
+ if (queclass(mp) == QPCTL || canput(uq))
+ put(uq, mp);
+ else {
+ putbq(q, mp);
+ break;
}
}
+ UNLOCK_LOWER;
return 0;
}
static void
debug_dump(q, mp)
- queue_t *q; /* not used */
- mblk_t *mp; /* not used either */
+ queue_t *q;
+ mblk_t *mp;
{
upperstr_t *us;
queue_t *uq, *lq;
(lq? qsize(lq): 0), us->mru, us->mtu);
}
}
+ mp->b_datap->db_type = M_IOCACK;
+ qreply(q, mp);
}
#ifdef FILTER_PACKETS
projects / ppp.git / blobdiff