-This file describes the installation process for ppp-2.2 on systems
+This file describes the installation process for ppp-2.3 on systems
running Solaris 2. The Solaris 2 and SVR4 ports share a lot of code
but are not identical. The STREAMS kernel modules and driver for
Solaris 2 are in the svr4 directory (and use some code from the
modules directory).
+NOTE: Although the kernel driver and modules have been designed to
+operate correctly on SMP systems, they have not been extensively
+tested on SMP machines. Some users of SMP Solaris x86 systems have
+reported system problems apparently linked to the use of previous
+versions of this software. I believe these problems have been fixed.
+
+
Installation.
*************
./configure
make
+If you wish to use gcc (or another compiler) instead of Sun's cc, edit
+the svr4/Makedefs file and uncomment the definition of CC. You can
+also change the options passed to the C compiler by editing the COPTS
+definition.
+
2. Install the programs and kernel modules: as root, do
make install
This installs pppd, chat and pppstats in /usr/local/bin and the kernel
modules in /kernel/drv and /kernel/strmod, and creates the /etc/ppp
-directory and populates it with default configuration files.
+directory and populates it with default configuration files. You can
+change the installation directories by editing svr4/Makedefs.
If your system normally has only one network interface, the default
Solaris 2 system startup scripts will disable IP forwarding in the IP
create an /etc/ppp/ip-up script containing something like this:
#!/bin/sh
- /usr/sbin/ndd -set /dev/ip ip_forwarding 2
+ /usr/sbin/ndd -set /dev/ip ip_forwarding 1
+
+See the man page for ip(7p) for details.
+
+64-bit Support.
+***************
+
+This version has been tested under Solaris 7 (and Solaris 8 Beta) in both
+32- and 64-bits environments (Ultra class machines). Installing the package
+by executing "make install" will result in additional files residing in
+/kernel/drv/sparcv9 and /kernel/strmod/sparcv9 subdirectories.
+
+64-bit modules and driver have been compiled and tested using Sun's cc.
+
+Synchronous Serial Support.
+***************************
+
+This version has working but limited support for the on-board synchronous HDLC
+interfaces. It has been tested with the /dev/se_hdlc and /dev/zsh drivers.
+Synchronous mode was tested with a Cisco router.
+
+There ppp daemon does not directly support controlling the serial interface.
+It relies on the /usr/sbin/syncinit command to initialize HDLC mode and
+clocking.
+
+Some bugs remain: large sized frames are not sent/received properly, and
+may be related to the IP mtu. This
+may be due to bugs in pppd itself, bugs in Solaris or the serial drivers.
+The /dev/zsh driver seems more larger and can send/receive larger frames
+than the /dev/se_hdlc driver. There is a confirmed bug with NRZ/NRZI mode
+in the /dev/se_hdlc driver, and Solaris patch 104596-11 is needed to correct
+it. (However this patch seems to introduce other serial problems. If you
+don't apply the patch, the workaround is to change the nrzi mode to yes or
+no, whichever works)
+
+How to start pppd with synchronous support:
+
+#!/bin/sh
+
+local=1.1.1.1 # your ip address here
+baud=38400 # needed, but ignored by serial driver
+
+# Change to the correct serial driver/port
+#dev=/dev/zsh0
+dev=/dev/se_hdlc0
+
+# Change the driver, nrzi mode, speed and clocking to match your setup
+# This configuration is for external clocking from the DCE
+connect="syncinit se_hdlc0 nrzi=no speed=64000 txc=rxc rxc=rxc"
+
+/usr/sbin/pppd $dev sync $baud novj noauth $local: connect "$connect"
+
+
+Sample Cisco router config excerpt:
+
+!
+! Cisco router setup as DCE with RS-232 DCE cable
+!
+!
+interface Serial0
+ ip address 1.1.1.2 255.255.255.0
+ encapsulation ppp
+ clockrate 64000
+ no nrzi-encoding
+ no shutdown
+!
projects / ppp.git / blobdiff