.\" pppoe-discovery.8 written by .\" Ben Hutchings , based on pppoe.8. .\" Licenced under the GPL version 2 or later. .TH PPPOE-DISCOVERY 8 .SH NAME pppoe\-discovery \- perform PPPoE discovery .SH SYNOPSIS .B pppoe\-discovery [ .I options ] .br .BR pppoe\-discovery " { " \-V " | " \-h " }" .SH DESCRIPTION .LP \fBpppoe\-discovery\fR performs the same discovery process as \fBpppoe\fR, but does not initiate a session. It sends a PADI packet and then prints the names of access concentrators in each PADO packet it receives. .SH OPTIONS .TP .BI \-I " interface" .RS The \fB\-I\fR option specifies the Ethernet interface to use. Under Linux, it is typically eth0 or eth1. The interface should be \(lqup\(rq before you start \fBpppoe\-discovery\fR, but should \fInot\fR be configured to have an IP address. This option is mandatory. .RE .TP .BI \-D " file_name" .RS The \fB\-D\fR option causes every packet to be dumped to the specified \fIfile_name\fR. This is intended for debugging only. .RE .TP .B \-U .RS Causes \fBpppoe\-discovery\fR to use the Host-Uniq tag in its discovery packets. This lets you run multiple instances of \fBpppoe\-discovery\fR and/or \fBpppoe\fR without having their discovery packets interfere with one another. You must supply this option to \fIall\fR instances that you intend to run simultaneously. .RE .TP .BI \-S " service_name" .RS Specifies the desired service name. \fBpppoe\-discovery\fR will only accept access concentrators which can provide the specified service. In most cases, you should \fInot\fR specify this option. Use it only if you know that there are multiple access concentrators or know that you need a specific service name. .RE .TP .BI \-C " ac_name" .RS Specifies the desired access concentrator name. \fBpppoe\-discovery\fR will only accept the specified access concentrator. In most cases, you should \fInot\fR specify this option. Use it only if you know that there are multiple access concentrators. If both the \fB\-S\fR and \fB\-C\fR options are specified, they must \fIboth\fR match. .RE .TP .B \-A .RS This option is accepted for compatibility with \fBpppoe\fR, but has no effect. .RE .TP .BR \-V " | " \-h .RS Either of these options causes \fBpppoe\-discovery\fR to print its version number and usage information, then exit. .RE .SH AUTHORS \fBpppoe\-discovery\fR was written by Marco d'Itri , based on \fBpppoe\fR by Dianne Skoll . .SH SEE ALSO pppoe(8), pppoe-sniff(8)