#!/bin/sh -f
#
# -*- Fundamental -*-
#
# kdebug 1  is SC_DEBUG
#        2  is SC_LOG_INPKT
#        4  is SC_LOG_OUTPKT
#        8  is SC_LOG_RAWIN
#        16 is SC_LOG_FLUSH
# 
# add together to get debugging you want
# Remember: for HW flow control you must you /dev/cufa or /dev/cufb
#
# This is used to start a ppp session over a link that is directly
# connected to another computer.  Make sure the peer runs at the
# same speed.
#
/usr/local/bin/pppd bsdcomp 10,10 ipcp-restart 4 ipcp-max-configure 5 lcp-echo-failure 3 lcp-echo-interval 30 debug crtscts kdebug 17 -pap -chap /dev/ttyfb 38400 lock
exit 0