X-Git-Url: http://git.ozlabs.org/?a=blobdiff_plain;f=pppd%2Fpppd.8;h=8ad98cb37ce7e7f172c4c9e8de3b1dd515e93323;hb=e87fe1bbd37a1486c5223f110e9ce3ef75971f93;hp=1cf0f67db62b181f584903a52eafd8b3aafa45fe;hpb=ad3937a0a38a696eb1a37dbf8f92e8e6072cdccb;p=ppp.git

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 1cf0f67..8ad98cb 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -260,6 +260,12 @@ Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
 compression in the corresponding direction.  Use \fInobsdcomp\fR or
 \fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
 .TP
+.B ca \fIca-file
+(EAP-TLS) Use the file \fIca-file\fR as the X.509 Certificate Authority
+(CA) file (in PEM format), needed for setting up an EAP-TLS connection.
+This option is used on the client-side in conjunction with the \fBcert\fR
+and \fBkey\fR options.
+.TP
 .B cdtrcts
 Use a non-standard hardware flow control (i.e. DTR/CTS) to control
 the flow of data on the serial port.  If neither the \fIcrtscts\fR,
@@ -271,6 +277,12 @@ RTS output. Such serial ports use this mode to implement true
 bi-directional flow control. The sacrifice is that this flow
 control mode does not permit using DTR as a modem control line.
 .TP
+.B cert \fIcertfile
+(EAP-TLS) Use the file \fIcertfile\fR as the X.509 certificate (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and 
+\fBkey\fR options.
+.TP
 .B chap\-interval \fIn
 If this option is given, pppd will rechallenge the peer every \fIn\fR
 seconds.
@@ -299,6 +311,18 @@ negotiation by sending its first LCP packet.  The default value is
 1000 (1 second).  This wait period only applies if the \fBconnect\fR
 or \fBpty\fR option is used.
 .TP
+.B crl \fIfilename
+(EAP-TLS) Use the file \fIfilename\fR as the Certificate Revocation List
+to check for the validity of the peer's certificate. This option is not
+mandatory for setting up an EAP-TLS connection. Also see the \fBcrl-dir\fR
+option.
+.TP
+.B crl-dir \fIdirectory
+(EAP-TLS) Use the directory \fIdirectory\fR to scan for CRL files in
+has format ($hash.r0) to check for the validity of the peer's certificate.
+This option is not mandatory for setting up an EAP-TLS connection.
+Also see the \fBcrl\fR option.
+.TP
 .B debug
 Enables connection debugging facilities.
 If this option is given, pppd will log the contents of all
@@ -568,6 +592,12 @@ transmitted packets be printed.  On most systems, messages printed by
 the kernel are logged by syslog(1) to a file as directed in the
 /etc/syslog.conf configuration file.
 .TP
+.B key \fIkeyfile
+(EAP-TLS) Use the file \fIkeyfile\fR as the private key file (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and 
+\fBcert\fR options.
+.TP
 .B ktune
 Enables pppd to alter kernel settings as appropriate.  Under Linux,
 pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
@@ -731,6 +761,9 @@ name to \fIname\fR.)
 Disable Address/Control compression in both directions (send and
 receive).
 .TP
+.B need-peer-eap
+(EAP-TLS) Require the peer to verify our authentication credentials.
+.TP
 .B noauth
 Do not require the peer to authenticate itself.  This option is
 privileged.