- for (; str_module_count > 0; str_module_count--) {
- if (ioctl(fd, I_PUSH, str_modules[str_module_count-1].modname)) {
- syslog(LOG_ERR, "str_restore: couldn't push module %s: %m",
- str_modules[str_module_count-1].modname);
- } else {
- MAINDEBUG((LOG_INFO, "str_restore: pushed module %s",
- str_modules[str_module_count-1].modname));
+ for (; str_module_count > 0; str_module_count--) {
+ if (ioctl(fd, I_PUSH, str_modules[str_module_count-1].modname)) {
+ if (errno != ENXIO)
+ syslog(LOG_WARNING, "Couldn't restore module %s: %m",
+ str_modules[str_module_count-1].modname);
+ } else {
+ MAINDEBUG((LOG_INFO, "str_restore: pushed module %s",
+ str_modules[str_module_count-1].modname));
+ }
+ }
+ pushed_ppp = 0;
+ }
+}
+
+
+/*
+ * List of valid speeds.
+ */
+struct speed {
+ int speed_int, speed_val;
+} speeds[] = {
+#ifdef B50
+ { 50, B50 },
+#endif
+#ifdef B75
+ { 75, B75 },
+#endif
+#ifdef B110
+ { 110, B110 },
+#endif
+#ifdef B134
+ { 134, B134 },
+#endif
+#ifdef B150
+ { 150, B150 },
+#endif
+#ifdef B200
+ { 200, B200 },
+#endif
+#ifdef B300
+ { 300, B300 },
+#endif
+#ifdef B600
+ { 600, B600 },
+#endif
+#ifdef B1200
+ { 1200, B1200 },
+#endif
+#ifdef B1800
+ { 1800, B1800 },
+#endif
+#ifdef B2000
+ { 2000, B2000 },
+#endif
+#ifdef B2400
+ { 2400, B2400 },
+#endif
+#ifdef B3600
+ { 3600, B3600 },
+#endif
+#ifdef B4800
+ { 4800, B4800 },
+#endif
+#ifdef B7200
+ { 7200, B7200 },
+#endif
+#ifdef B9600
+ { 9600, B9600 },
+#endif
+#ifdef B19200
+ { 19200, B19200 },
+#endif
+#ifdef B38400
+ { 38400, B38400 },
+#endif
+#ifdef EXTA
+ { 19200, EXTA },
+#endif
+#ifdef EXTB
+ { 38400, EXTB },
+#endif
+#ifdef B57600
+ { 57600, B57600 },
+#endif
+#ifdef B115200
+ { 115200, B115200 },
+#endif
+ { 0, 0 }
+};
+
+/*
+ * Translate from bits/second to a speed_t.
+ */
+int
+translate_speed(bps)
+ int bps;
+{
+ struct speed *speedp;
+
+ if (bps == 0)
+ return 0;
+ for (speedp = speeds; speedp->speed_int; speedp++)
+ if (bps == speedp->speed_int)
+ return speedp->speed_val;
+ syslog(LOG_WARNING, "speed %d not supported", bps);
+ return 0;
+}
+
+/*
+ * Translate from a speed_t to bits/second.
+ */
+int
+baud_rate_of(speed)
+ int speed;
+{
+ struct speed *speedp;
+
+ if (speed == 0)
+ return 0;
+ for (speedp = speeds; speedp->speed_int; speedp++)
+ if (speed == speedp->speed_val)
+ return speedp->speed_int;
+ return 0;
+}
+
+/*
+ * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
+ * at the requested speed, etc. If `local' is true, set CLOCAL
+ * regardless of whether the modem option was specified.
+ */
+set_up_tty(fd, local)
+ int fd, local;
+{
+ int speed;
+ struct termios tios;
+
+ if (tcgetattr(fd, &tios) < 0) {
+ syslog(LOG_ERR, "tcgetattr: %m");
+ die(1);
+ }
+
+ if (!restore_term) {
+ inittermios = tios;
+ ioctl(fd, TIOCGWINSZ, &wsinfo);
+ }
+
+ tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
+ if (crtscts > 0)
+ tios.c_cflag |= CRTSCTS;
+ else if (crtscts < 0)
+ tios.c_cflag &= ~CRTSCTS;
+
+ tios.c_cflag |= CS8 | CREAD | HUPCL;
+ if (local || !modem)
+ tios.c_cflag |= CLOCAL;
+ tios.c_iflag = IGNBRK | IGNPAR;
+ tios.c_oflag = 0;
+ tios.c_lflag = 0;
+ tios.c_cc[VMIN] = 1;
+ tios.c_cc[VTIME] = 0;
+
+ if (crtscts == 2) {
+ tios.c_iflag |= IXOFF;
+ tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
+ tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
+ }
+
+ speed = translate_speed(inspeed);
+ if (speed) {
+ cfsetospeed(&tios, speed);
+ cfsetispeed(&tios, speed);
+ } else {
+ speed = cfgetospeed(&tios);
+ /*
+ * We can't proceed if the serial port speed is B0,
+ * since that implies that the serial port is disabled.
+ */
+ if (speed == B0) {
+ syslog(LOG_ERR, "Baud rate for %s is 0; need explicit baud rate",
+ devnam);
+ die(1);